1) radial force variations
径向力波动
2) first harmonic radial force vibration
一次谐波径向力波动值
1.
The cave at the carcass ply connection was eliminated by using 5° cutting angle instead of 0°,the acceptance rate of the first harmonic radial force vibration was improved from 55% to 90% by controlled building process;the overall diameter,strength,endurance and speed performance of the finished tire met the requirements of design.
采用5°裁断角度胎体帘布有效解决了0°裁断角度胎体帘布导致的轮胎充气后胎体帘布接头处凹痕问题,对成型工艺进行控制后轮胎的均匀性一次谐波径向力波动值合格率从55%提高到90%;成品轮胎的外缘尺寸、强度、耐久性能和高速性能均符合设计要求。
3) Radial hydrodynamic
径向动力学
4) RFV Redial Force Variation
径向力震动
5) independent radial hydraulic pressure
主动径向压力
1.
To satisfy the forming need of low plasticity materials and large height-diameter ratio parts,a new process of hydrodynamic deep drawing(HDD) with independent radial hydraulic pressure was proposed.
基于低塑性、大高径比铝合金板材零件成形需求,提出了主动径向压力充液拉深新技术。
2.
To satisfy the forming need of low plasticity materials and large height-diameter ratio cups,the hydrodynamic deep drawing(HDD) with independent radial hydraulic pressure technology was proposed.
以零件成形最终壁厚分布为评定标准,分析了不同主动径向压力加载路径对成形质量的影响。
3.
Aimed at the forming need of aluminum-magnesium alloy and other low plasticity materials,a new double loading paths process of hydrodynamic deep drawing(HDD) with independent radial hydraulic pressure and chamber pressure was brought forward.
模拟结果表明,采用合理的液室加载曲线,并配合20~45 MPa的主动径向压力,可有效地提高铝镁合金平底筒形件的成形极限,拉深比可达到3。
6) radial vibration stress
径向振动应力
补充资料：径向边界值
径向边界值
radial boundary value
【补注】所考虑的函数通常是解析或调和函数.亦见解析函数的边界性质(boulldary properties of anal州c位朗石。拙)及其参考文献;亦可参看角边界值(ang山rboUn内叮value)和Fat.定理(Fatouthe~).径向边界值[radiai脉.幽叮val此;p幼。a几‘皿oe rp。-妞“，皿oe 3.明eH“el 定义于单位圆盘D={:‘C:l:}<1}上的函数f(:)在边界点心=。’”处的值，它等于函数f(:)当:沿半径H二{:=r。‘日:o<;
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条