导流底孔布置,arrangements of diversion bottom outlets,音标,读音,翻译,英文例句,英语词典

您的位置：首页 -> 词典 -> 导流底孔布置

1) arrangements of diversion bottom outlets 点击朗读

导流底孔布置

2) layout of bottom hole 点击朗读

底孔布置

3) diversion bottom outlet 点击朗读

导流底孔

Formwork for top-section of diversion bottom outlets of Jinghong Dam; 点击朗读

景洪大坝导流底孔顶部的模板设计与施工

Quality control supervision on metal structure installation of diversion bottom outlets; 点击朗读

导流底孔金属结构安装工程监理质量控制

With their major functions of river diversion and closure in the 3rd construction phase and releasing flood in the initial cofferdam supported generation period, the diversion bottom outlets of the TGP are hardly seen in the world for their high water head, huge discharges and complex operation conditions.

三峡工程导流底孔承担三期导、截流和围堰发电期泄洪任务，水头高、流量大、运行条件复杂，为国内外导流工程罕见。

更多例句>>

4) bottom diversion outlet 点击朗读

导流底孔

Three dimension FEM is adopted in the stress analysis of a RCC gravity dam during the construction diversion period,which especially for clearing the stress distribution of the top area RCC concrete that under design RCC concrete age and around area of the large-scale bottom diversion outlet.

采用三维有限元法对某碾压混凝土坝(RCC)在施工导流期的应力场进行分析,着重校核了顶部未到设计龄期的碾压混凝土和大型导流底孔周边的应力分布;并初步探讨了在多因素影响情况下,从开始施工到蓄水运行的坝体温度场、应力场的全过程仿真分析方法。

更多例句>>

5) bottom outlet diversion 点击朗读

底孔导流

6) river diversion arrangement 点击朗读

导流布置

补充资料：ANSYS SOLID65环向布置钢筋的例子

ANSYS SOLID65环向布置钢筋的例子
! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1%
! 作者: 陆新征清华大学土木系
!
FINISH
/CLEAR

/PREP7
!*
! 单元属性
ET,1,SOLID65
!*
KEYOPT,1,1,0
KEYOPT,1,5,0
KEYOPT,1,6,0
KEYOPT,1,7,1
!*
!实参数1：不同方向配筋
R,1,2,.001, , ,2, .01,
RMORE, 90, ,2,.005 ,90 ,90 ,

!材料属性
!混凝土基本材料属性
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,30E2
MPDATA,PRXY,1,,.2
!屈服准则
TB,MISO,1,1,5,
TBTEMP,0
TBPT,,0.0005,15
TBPT,,0.001,21
TBPT,,0.0015,24
TBPT,,0.002,27
TBPT,,0.003,24
!破坏准则
TB,CONC,1,1,9,
TBTEMP,0
TBDATA,,.5,.9,3,30,,
TBDATA,,,,1,,,
MPTEMP,,,,,,,,
MPTEMP,1,0
!钢材基本属性
MPDATA,EX,2,,200E3
MPDATA,PRXY,2,,.27
!屈服准则
TB,BISO,2,1,2,
TBTEMP,0
TBDATA,,310,2E3,,,,

! 管道内径和外径
CYL4,0,0,3000, , , ,10000
CYL4,0,0,2000, , , ,10000
VSBV, 1, 2

! 定义局部柱坐标
CSWPLA,11,1,1,1,
KWPAVE, 11
WPRO,,-90.000000,
VSBW, 3
WPCSYS,-1,0
KWPAVE, 1
WPRO,,,-90.000000
VSBW,ALL

ESIZE,500,0,
! 注意：设定单元局部坐标
VATT, 1, 1, 1, 11
!*
VSWEEP,ALL
/DEVICE,VECTOR,1
/ESHAPE,1.0
/REPLO
! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

底吹布置底孔泄流炮孔布置钻孔布置

导流板布置三峡导流底孔导流底孔封堵底片布置单底布置井底布置

说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
	您的位置：首页 -> 词典 -> 导流底孔布置 1) arrangements of diversion bottom outlets 导流底孔布置 2) layout of bottom hole 底孔布置 3) diversion bottom outlet 导流底孔 1. Formwork for top-section of diversion bottom outlets of Jinghong Dam; 景洪大坝导流底孔顶部的模板设计与施工 2. Quality control supervision on metal structure installation of diversion bottom outlets; 导流底孔金属结构安装工程监理质量控制 3. With their major functions of river diversion and closure in the 3rd construction phase and releasing flood in the initial cofferdam supported generation period, the diversion bottom outlets of the TGP are hardly seen in the world for their high water head, huge discharges and complex operation conditions. 三峡工程导流底孔承担三期导、截流和围堰发电期泄洪任务，水头高、流量大、运行条件复杂，为国内外导流工程罕见。更多例句>> 4) bottom diversion outlet 导流底孔 1. Three dimension FEM is adopted in the stress analysis of a RCC gravity dam during the construction diversion period,which especially for clearing the stress distribution of the top area RCC concrete that under design RCC concrete age and around area of the large-scale bottom diversion outlet. 采用三维有限元法对某碾压混凝土坝(RCC)在施工导流期的应力场进行分析,着重校核了顶部未到设计龄期的碾压混凝土和大型导流底孔周边的应力分布;并初步探讨了在多因素影响情况下,从开始施工到蓄水运行的坝体温度场、应力场的全过程仿真分析方法。更多例句>> 5) bottom outlet diversion 底孔导流 6) river diversion arrangement 导流布置补充资料：ANSYS SOLID65环向布置钢筋的例子 ANSYS SOLID65环向布置钢筋的例子 ! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1% ! 作者: 陆新征清华大学土木系 ! FINISH /CLEAR /PREP7 !* ! 单元属性 ET,1,SOLID65 !* KEYOPT,1,1,0 KEYOPT,1,5,0 KEYOPT,1,6,0 KEYOPT,1,7,1 !* !实参数1：不同方向配筋 R,1,2,.001, , ,2, .01, RMORE, 90, ,2,.005 ,90 ,90 , !材料属性 !混凝土基本材料属性 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,EX,1,,30E2 MPDATA,PRXY,1,,.2 !屈服准则 TB,MISO,1,1,5, TBTEMP,0 TBPT,,0.0005,15 TBPT,,0.001,21 TBPT,,0.0015,24 TBPT,,0.002,27 TBPT,,0.003,24 !破坏准则 TB,CONC,1,1,9, TBTEMP,0 TBDATA,,.5,.9,3,30,, TBDATA,,,,1,,, MPTEMP,,,,,,,, MPTEMP,1,0 !钢材基本属性 MPDATA,EX,2,,200E3 MPDATA,PRXY,2,,.27 !屈服准则 TB,BISO,2,1,2, TBTEMP,0 TBDATA,,310,2E3,,,, ! 管道内径和外径 CYL4,0,0,3000, , , ,10000 CYL4,0,0,2000, , , ,10000 VSBV, 1, 2 ! 定义局部柱坐标 CSWPLA,11,1,1,1, KWPAVE, 11 WPRO,,-90.000000, VSBW, 3 WPCSYS,-1,0 KWPAVE, 1 WPRO,,,-90.000000 VSBW,ALL ESIZE,500,0, ! 注意：设定单元局部坐标 VATT, 1, 1, 1, 11 !* VSWEEP,ALL /DEVICE,VECTOR,1 /ESHAPE,1.0 /REPLO ! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条底吹布置底孔泄流炮孔布置钻孔布置

©2011 dictall.com