说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 多轴荷载
1)  multi-axle loads
多轴荷载
1.
To determine the equivalent uni-axle load of multi-axle loads is a key aspect in pavement design.
多轴荷载与单轴荷载间的等效是路面设计轴载换算的重要问题之一。
2)  multi-axial loading
多轴载荷
1.
It could be applied to uniaxial stress destroying mode with several dangerous positions under multi-axial loading.
针对多轴载荷下多危险点单轴应力破坏模式,以损伤等效为基础,提出了一种多轴载荷下的疲劳试验载荷谱编制方法。
2.
The characteristics of stress and damage in a multi-hole cylinder are analyzed under multi-axial loading.
对多轴载荷作用下的多孔薄壁构件进行了应力与损伤特点分析。
3)  multi-axle moving loads
多轴移动载荷
4)  multiaxial tensile loads
多轴向拉伸载荷
1.
In order to gain some insight into the precracked tearing behavior of biaxial warp knitted fabric coated with PVC under multiaxial tensile loads,the influences of the shape and size of sample,the precracked length and direction under multiaxial loads are observed and analyzed.
为了解具有小裂缝的PVC/双轴向经编织物在多轴向拉伸载荷下的力学行为,分别针对不同形状、不同初始开缝长度及不同初始开缝角度试样在多轴向拉伸载荷下的开缝撕裂情况进行观察与分析。
5)  axial load
轴向载荷
1.
Analysis of axial load influence on mechanics characteristic of ocean deep water drilling riser;
轴向载荷对海洋深水钻井隔水管力学特性的影响分析
2.
Stability of pipe conveying fluid under axial load;
轴向载荷输流管道的稳定性分析
3.
We have deducedthe simplified mechanics model for calculating frictional resistance and axial load when lowering pipe string or lifting pipe string in a inclined well.
在斜井中 ,考虑了方位角的变化 ,建立管柱受力平衡方程 ,推导出斜井中下管柱和提管柱时摩擦阻力和轴向载荷的简化力学模型 ,分析计算了下管柱和提管柱时摩擦阻力、轴向载荷以及管柱轴向变形等重要参数的解析公式。
6)  uniaxial load
单轴载荷
1.
Experimental study of the NMR characteristics in rock under uniaxial load;
单轴载荷下岩石核磁共振特征的实验研究
2.
In this paper,acoustic wave technology was used to study the damaged characteristics of salt rock under uniaxial loading and the effect of damage on dissolution to reveal the parietal injury dissolved characteristics in salt cavity construction period.
采用声波技术研究盐岩在单轴载荷条件下的损伤特征,并对受损盐岩进行溶解试验分析,以此来分析盐穴建造期盐岩的损伤溶蚀机制。
补充资料:单轴各向异性
      单轴各向异性是磁晶各向异性的最简单形式,即自发磁化的稳定方向(或易磁化方向)平行于一特殊晶轴。如六方晶系钴的自发磁化方向平行于 C轴(见晶体结构),这就表现出强的单轴各向异性。磁性材料的单轴各向异性值一般都低于其磁晶各向异性值,为103erg/cm3量级。磁性材料经磁场热处理或强的冷加工而产生的感生各向异性,都属于单轴各向异性。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条