说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 靶控浓度
1)  Target-controlled concentrations
靶控浓度
2)  target-controlled infusion
靶浓度控制输注
3)  target plasma concentration
靶控血浆浓度
1.
Objective To investigate the half-effective target plasma concentration(CP50) of remifentanil for respiratory depression Methods Eighty patients of ASA status Ⅰ-Ⅱ undergoing combined spinal epidural(CSE) anesthesia were randomly divided into eight groups(n=10) according to the target plasma concentration of remifentanil(target plasma concentration of 1.
目的观察瑞芬太尼靶控输注(TCI)时患者呼吸抑制的50%有效靶控血浆浓度(CP50)。
4)  Propofol-targeted Concentration
异丙酚靶浓度
1.
Effect of Transcutaneous Electrical Acupoints Stimulation on Propofol-targeted Concentration and Stress Response;
术中根据血流动力学变化追加芬太尼,调节异丙酚靶浓度,维持BIS值在45~55范围。
5)  target effect-site concentration
效应室靶浓度
1.
Objective To explore target effect-site concentration of remifentanil and propofol target-controlled infusion(TCI) for general anesthesia in elderly patients with NYHA Ⅱ~Ⅲ.
目的探讨瑞芬太尼复合异丙酚靶控输注(TCI)全凭静脉麻醉用于心功能Ⅱ~Ⅲ级老年患者全麻诱导的合适效应室靶浓度。
6)  concentration control
浓度控制
1.
The construction and applied condition of onedimension water quality model used extensively in concentration control of river pollution is analyzed and studied.
分析和研究了在河流污染浓度控制中广泛应用的一维水质模型结构和应用条件。
2.
Based on the dynamical analysis, a mathematical model of sand/dust concentration change is built up, and a concentration control strategy, in which feeder speed and valve’s open degree are adjusted at same time, is presented and simulated.
砂尘环境会对直升机工作性能和可靠性产生重要影响,针对直升机砂尘环境试验风洞内的砂尘浓度控制难题,在对其受控对象进行动态特性分析的基础上,建立起砂尘浓度变化的动态特性模型,提出了一种旋转给料器转速调节与气力输送系统调节阀开度调节相结合的沙尘浓度控制策略,并对其控制效果进行了仿真研究,仿真结果表明这一控制策略可以有效提高直升机砂尘环境试验风洞的砂尘浓度控制效果。
3.
At the same time We emphasiz the significance and the necessity of the chemical dosing concentration control.
同时着重阐述了药液浓度控制的重要性和在某工程中的实现方法 。
补充资料:靶扫描和靶重建


靶扫描和靶重建


影像学术语。CT检查中,对扫描野(SFOV)中某一兴趣区扫描时行较大矩阵重建的方式称靶扫描。在扫描及影像重建完成后,对显示野(DFOV)中某一兴趣区重新进行较大矩阵重建成像的方式称靶重建。前者是直接利用扫描野中兴趣区的较大量的原始数据进行影像重建,后者则是利用常规扫描中采集的原始数据进行兴趣区的影像重建。两种技术实现的基本前提都是一次扫描所获得的投影测量数据必须能够满足兴趣区影像重建矩阵所需的信息量。靶扫描在扫描前预先设定兴趣区,成像后不储存非兴趣区原始数据;靶重建则需储存层面扫描所获得的全部原始数据,占用较多的磁盘空间,但以后可在图像中任选兴趣区进行局部重建。两种技术在成像效果(空间分辨率,对比分辨率)上是一致的,这与单纯的局部图像放大(zoom)不同。后者没有增加兴趣区内像素数量,虽使影像扩大但分辨率并未提高,清晰度反有下降。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条