1) B4C matrix composite
B4C陶瓷
1.
B4C matrix composite material was prepared through sintering using TiAl intermetallic compound as sintering additive.
以TiAl金属间化合物为烧结助剂对B4C陶瓷进行活化强化烧结,制备出B4C陶瓷基复合材料,通过电化学阻抗、扫描电镜等手段对其耐海水腐蚀性能进行了研究,并由此对其腐蚀机理进行了探索。
2) B_4C/(W,Ti)C ceramics
B4C/(W,Ti)C陶瓷
3) ZrB2-B4C composites
ZrB2-B4C复相陶瓷
1.
Using boron carbide(B4C),zirconium oxide(ZrO2) and graphite(C) as starting materials,ZrB2-B4C composites were prepared by Spark Plasma Sintering-Reaction Synthesis.
采用碳化硼还原法,利用SPS烧结技术烧结制备了ZrB2-B4C复相陶瓷。
4) B_4C matrix ceramic composite
B4C基陶瓷复合材料
5) boron carbide
B4C
1.
High-temperature adhesive was prepared using phenol-formaldehyde resin (PF) as matrix and boron carbide (B_4C) as modifier.
以酚醛树脂为基体,加入B4C作为改性填料制备出高温粘结剂,并对Si3N4陶瓷进行粘接。
2.
This paper theoretically analyzes the wettability of boron carbide by liquid aluminum and discusses the wettability difference between theoretical and practical results based on the characteristics of aluminum and its interaction with boron carbide.
依据金属Al的特性及其与B4C相互作用的关系,在理论上分析Al对 B4C的润湿性,分析理论润湿性与实际润湿性差异的原因,在此基础上,通过实验寻求改善Al对B4C润湿性的方法和工艺,发现升高温度可以改善润湿性,温度由 1 050℃升至1 100℃时,润湿角θ由52°降至23°;在Al中添加小量Mg后,真空 1×10-3Pa,温度1 100℃×3 h时Al对B4C润湿角由原来的23°降至9°。
3.
A boron carbide-aluminum composite was produced by vacuum-pressure infiltration process.
采用真空—压力熔渗工艺制备了B4C/Al金属陶瓷复合材料。
6) Ceramics
[英][si'ræmiks] [美][sə'ræmɪks]
陶瓷
1.
Research status of joining of ceramics and metals;
陶瓷与金属连接的研究现状
2.
Design and Choice of Bag Filter Parameters in Ceramics Dustry;
陶瓷生产袋式除尘器参数的选择与设计
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条