1) YBaCuO coated conductor
YBaCuO涂层导体
1.
As conductive buffer of the second generation high temperature superconductor tapes——YBaCuO coated conductor,Ag films was heat treated in Ar atmosphere to grow in the (200) preferred orientation after magnetron sputtered on the cube textured Ni-5at% W substrates.
采用磁控溅射法在立方织构Ni-5%(原子分数,下同)W基底上沉积了Ag薄膜作为第二代高温超导带材——YBaCuO涂层导体的导电缓冲层,并通过后期在Ar气氛下热处理使Ag膜具有(200)择优取向。
2) YBaCuO supercondutor
YBaCuO超导体
3) YBaCuO superconductor powder
YBaCuO超导粉体
4) coated conductor
涂层导体
1.
Structure analysis of Ni-7%W alloy substrate used for coated conductor
涂层导体用Ni-7%W合金基带的织构分析
2.
The high performance Yttrium Barium Copper Oxide (YBCO) coated conductor is promising in electric applications such as cables, motors, energy storage and magnets, due to its high irreversibility field at 77 K.
本文在具有双轴织构的10m级NiW合金基带上动态、连续地制备了具有Y2O3,YSZ,CeO2等多层隔离层的YBCO涂层导体;研究了膜的生长条件及各层膜之间的取向关系等,成功地制备出10m长双轴取向的CeO2/YSZ/Y2O3隔离层,Y2O3,YSZ和CeO2的!扫描半高宽沿长度方向都分布在7°～8。
3.
An overview of the recent progress of 2 G superconductor tapes was provided,and the structures and the fabrication techniques of coated conductor on Ni and Ni.
综述了近年来二代超导带材的发展状况,并对在镍和镍合金基带上制备涂层导体的工艺技术以及其基本结构特征做了较为系统的介绍,包括基带的制备技术、隔离层的生长、化学法和物理气相沉积法生长YBCO等。
5) coated conductors
涂层导体
1.
The metal organic deposition(MOD) of YBa_2Cu_3O_(7-x)(YBCO) using metal trifluoroacetate(TFA) precursor is considered to be a strong candidate as a low-cost fabrication process in coated conductors.
三氟乙酸盐-金属有机沉积技术(TFA-MOD)是制备钇钡铜氧涂层导体的有发展前景的方法之一。
2.
Nowadays, the second generation superconductor, YBC0 coated conductors (CCs), which has promising applied field such as medicine, electricity, military, and electronic industry, attracts a lot of countries scientists and governors attention.
第二代高温超导体——YBCO涂层导体在医学、电力、军事及电子领域拥有非常巨大的应用潜力,目前已成为各国竞相研究开发的重点。
3.
Developing multi-functional single buffer layer is one of the most important challenges for simplification of coated conductors configuration.
获得多功能单一过渡层是简化涂层导体多层结构的主要课题之一。
6) YBCO coated conductor
YBCO涂层导体
1.
The quench behavior of YBCO coated conductors subjected to over-critical current with different pulse durations at 50 Hz is researched in order to explore their prospects for power application in liquid nitrogen.
为了探索YBCO涂层导体在液氮温度77K和50Hz工频下的电力应用,实验研究YBCO涂层导体在不同过流冲击条件下的失超特性。
2.
The structure changes in Ni5W alloy substrates for YBCO coated conductor heat-treated at 1 000 ℃ temperature have been investigated.
研究了YBCO涂层导体用的立方织构Ni5W合金基带在1000℃下快速加热和快速冷却处理时的结构变化。
3.
In this paper, the effect of tensile strain on the transport characteristics of YBCO coated conductor has been investigated at Ic, n value and self field and 77K.
本文通过实验研究了拉伸应变对YBCO涂层导体的临界电流(Ic)、n值和交流损耗的影响(零场,77K),实验结果表明,随着拉伸应变的增大,YBCO涂层导体Ic的变化分为三个阶段,开始缓慢上升,然后缓慢下降,最后快速下降,Ic的上升表明带材中存在残余压缩应变,Ic的衰减是由于应变导致弱连接区域的钉扎势与晶界间临界电流密度同时减小引起的;而n值随应变增加基本上没有变化,说明沿导体长度方向的Ic分布没有变化。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条