说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 无模型控制技术
1)  model-free control technology
无模型控制技术
1.
Technicians decided to introduce model-free control technology in the control system.
决定采用无模型控制技术对控制系统进行改造。
2)  technique of non-model control
无模控制技术
3)  model-free adaptive control
无模型控制
1.
Investigation of model-free adaptive control for single-step neutralization process;
无模型控制方法在泵式中和pH值控制中的研究
4)  model free control
无模型控制
1.
Study on control of multivariable coupling systems with model free control method;
无模型控制方法对多变量耦合系统控制的应用研究
2.
This paper presents an integrated control algorithm based on the GPC,Smith predictive control,model free control and the multi-variable state feedback control.
本文将广义预测控制、Smith预估控制、无模型控制律和多变量参数的状态变量反馈控制策略有机地结合起来,提出了一种把几种控制算式结合起来的控制器综合控制算法。
3.
The paper researched the design problem and the improved method ofmodel free control.
本文从介绍系统的新控制方法入手,研究了无模型控制方法的设计问题和具体改进方法。
5)  model-free control
无模型控制
1.
A simple Algorithm of Model-Free Control with a Reformative Method of Simultaneous Perturbation Stochastic Approximation;
一种简易的无模型控制算法——改进的同时扰动随机逼近控制
2.
The definition and classification are given for the several existing model-free control (MFC) methods.
给出了无模型控制的定义,并对已存在的无模型控制方法进行了分类。
3.
It is a model-free control method.
给出了解决这类问题的一种有效的方法,即无模型控制方法,指出这种方法有一系列优越的性能,并给出了成功应用的实例。
6)  control without model
无模型控制
1.
A kind of macro-economic dynamic control research based on control without model;
基于无模型控制的一类宏观经济动态调控
补充资料:木工支模拆模安全技术操作规程
第1条 模板支撑不得使用腐朽、扭裂、劈裂的材料。顶撑要垂直,底端平整坚实,并加垫木。木楔要钉牢,并用横顺拉杆和剪刀撑拉牢。
第2条 采用行架支模应严格检查,发现严重变形、螺栓松动等应及时修复。
第3条 支模应按工序进行,模板没有固定前,不得进行下道工序。禁止利用拉杆、支撑攀登上下。
第4条 支设4米以上的立柱模板,四周必须顶牢,操作时要搭设工作台,不足4米的,可使用马凳操作。
第5条 支设独立梁、柱模应设临时工作台,不得站在柱模上操作和在梁启模上行走。
第6条 拆除模板应经施工技术人员同意。操作时应按顺序分段进行,严禁猛撬、硬砸或大面积撬落和拉倒。工完前;不得留下松动和悬挂的模板,拆下的模板应及时运送到指定地点集中堆放。
第7条 拆除薄腹梁、吊车梁、行架等预制构件模板,应随拆随加顶撑支牢。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条