3) dimension optimization
尺寸优化
1.
The dimension optimization algorithm of corrugated case was studied aiming at the limited application of the computer-aided design of corrugated case.
针对目前瓦楞纸箱的计算机辅助设计系统应用的局限性,对瓦楞纸箱尺寸优化设计的算法进行了研究,提出了两种尺寸优化设计算法。
2.
At present,the optimization methods of slider topology design include the topology optimization method and dimension optimization method.
磁头滑块承载面结构优化设计是提高硬盘存储密度的主要方法之一,目前优化设计的方法主要分为拓扑优化和尺寸优化两大类,2种方法都存在着各自的优缺点。
4) size optimization
尺寸优化
1.
In this paper,the basic theory and method of structure and size optimization of beam-sheet on big part in machine tool based on APDL are discussed.
本文分析了基于APDL机床大件筋板结构尺寸优化设计的基本原理和方法,然后采用APDL语言对XH786主轴箱筋板参数化建模,并用2种不同方案,对其尺寸参数优化。
2.
In order to reduce structural weight of aircraft,in this paper,integrate shape/size optimization was utilized to a high aspect-ratio flying wing structure design.
在形状优化层次重点考虑主承力元件翼梁的位置,尺寸优化主要考虑各元件的几何尺寸。
3.
The second one is size optimization that gives the intermediate parameters of wing structure.
第一个层次为拓扑优化,并由此确定纵向骨架的个数与位置的最优布局;第二个层次为尺寸优化,它用来确定翼面的中间参数;第三个层次为稳定性准则优化,它确定横向骨架的个数与位置的最优布局。
5) sizing optimization
尺寸优化
1.
After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained.
采用均匀设计法给出若干样本点,使用准则优化手段进行尺寸优化设计,构造了形状设计变量与尺寸优化结果之间的二次多项式响应面模型,采用复合形法完成了基于响应面的形状优化设计。
6) dimension design
尺寸设计
1.
In the dimension design of coal pillars in strip mining,presently,most of them are carried out by analyzing strength stability,without considering the effect of weak plane in coal pillar.
针对在条带开采煤柱尺寸设计中大多数是采用强度稳定性分析的方法,而没有考虑弱面对煤柱稳定性的影响,由于弱面的存在,煤柱常常会因抗剪强度不够而产生剪切破坏等问题。
2.
on the basis of Lest squres solution,its dimension design linear equations were set up.
提出了一种钳口作平动的钳子 ,基于最小二乘法建立了该种钳子尺寸设计的线性方程组 ,通过三维动画与试制验证了设计的正确
3.
on the dimension design of coal pillars in strip mining, presently, most of them are carried out by analyzing strength stability, without considering the effect of weak plane in coal pillar, in fact ,coal pillars with weak plane are often damaged, because the shear strength is not enough.
在条带开采煤柱尺寸设计中,目前大多数是采用强度稳定性分析的方法,而没有考虑弱面对煤柱稳定性的影响。
补充资料：尺寸
尺寸
尺寸 脉学名词。 ①尺脉与寸脉。《灵枢·终始》：“少气者，脉口人迎俱少，而不称尺寸也。” ②寸口脉。《难经·二难》：“尺寸者，脉之大要会也。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条