1) Brostrm ice load model
Brostrm载荷模型
2) load model
载荷模型
1.
The specific features of acting pressure and stress of involute scroll teeth were analyzed and the criterion for calculating bending fatigue-strength of scroll tooth roots was determined with a load model based on tooth root bending-fatigue strength being obtained.
分析渐开线动涡旋齿的作用压力和应力特点,确定了涡旋齿根弯曲疲劳强度计算准则,得到基于齿根弯曲疲劳强度的载荷模型。
2.
In this study,through analyzing the deficiency of existent three-dimensional CAD system in depicting load information of product,consides that only establishing load model can carry real product design,then brings forward the basic idea of load model through analyzing part loads.
首先分析了现存的三维CAD系统在描述产品载荷信息方面的不足,认为只有在三维CAD系统中建立产品的载荷模型才能够进行真正意义上的产品设计,并且通过对零件所受载荷进行分析提出了载荷模型的基本思想。
3) load model
荷载模型
1.
This paper introduces a new method to acquire a FEM load model by back analyzing the measured displacements of tunnel.
介绍了一种以荷载模型为求解对象的位移反分析法。
2.
The load model and the resistance model are discussed and the nominal values.
基于荷载模型和抗力模型,确定了作用于既有大跨空间钢结构的各类荷载标准值。
3.
In this paper, based on deteriorating resisting force model and load model, the ultimate state equations of RC bridge were established; the code to calculate the time-dependent coefficient of reliability were composed as well.
论文在抗力衰减模型和桥梁荷载模型的基础上,建立了RC桥梁结构极限状态方程,编制了结构随时间变化的可靠指标计算程序。
4) Model load
模型载荷
5) V-M loading space
V-M荷载
6) multi-load model
多载荷模型
1.
Operating loads of HVDC converters are classified according to endurance performances of thyristor element and a multi-load model taking different loading conditions into account is established.
应用载荷-性能干涉分析方法对高压直流换流器的失效模式和机理进行了分析说明,并根据晶闸管元件的耐受性能对换流阀的运行载荷进行分类,进而建立了一种能计及不同载荷条件的新颖的多载荷模型。
补充资料：BR
顺丁橡胶是1，3-丁二烯采用定向溶液聚合方法得到的高顺式1，4结构含量的聚丁二烯，称为聚丁二烯橡胶，是有规立构橡胶，简称 BR， 高分子量的顺丁橡胶分子量为(80-120)×104；中高分子量的顺丁橡胶分子量为(25-40)×104。分子量分布较窄。玻璃化温度TG＝-110 ℃。具有弹性高、低温性能好、耐磨性优异、耐曲挠性良好等特点。顺丁橡胶的缺点是拉伸强度、撕裂强度较低，抗湿滑性差，冷流性大，加工性能稍差。溶解度参数δ＝8．3-8．6。溶于环己烷、正庚烷、正己烷、苯、甲苯等。
拉伸强度约13～14Mpa，扯断伸长率约为450%。
拉伸强度约13～14Mpa，扯断伸长率约为450%。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条