1) High-strength Wear Resistant Steel
高强耐磨钢
1.
Research on Planing Process of High-strength Wear Resistant Steel
高强耐磨钢刨削加工工艺研试
2) wear-resisting &. high-strength steel
耐磨高强钢
3) High strength hardfacing rail
高强耐磨钢轨
4) strength toughness wear-resistant steel
高强韧耐磨钢
5) Super high wearable
超强高耐磨
6) high strength weathering steel
高强耐候钢
1.
Composition design and smelting of 400MPa high strength weathering steel were carried out in laboratory.
进行了400 MPa级高强耐候钢的成分设计和试验室冶炼,通过热模拟试验,分析了不同工艺条件下奥氏体晶粒的变化规律;并进一步测定了试制钢的动态、静态CCT曲线,对其相变规律进行了初步研究。
2.
CCT curves of 450 MPa and 550MPa high strength weathering steel were studied by gleeble1500 hot simulator and DT-1000 dilatometer.
采用Gleeble1 5 0 0热模拟试验机及DT 1 0 0 0膨胀仪研究了 4 5 0MPa和 5 5 0MPa级高强耐候钢的连续冷却转变曲线 ,分析了不同变形及冷却工艺条件下高强度耐候钢的金相组织类型。
3.
An original position statistic analysis method is used to calculate the segregation degree of chemical composition in continuous-casting slab of high strength weathering steel smelted by converter for CSP.
采用原位统计分析方法,计算得到CSP线使用转炉冶炼高强耐候钢铸坯各组成元素的偏析度,定量检测出了铸坯的偏析部位及其变化;从钢坯横剖面不同部位致密度的三维立体图和二维等高图,直观地表述铸坯的缩孔、疏松的部位及其变化,得到剖面上任意指定位置的致密度数值。
补充资料:高强
(武艺)高超。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条