说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 氮浓度梯度
1)  nitrogen concentration gradient
氮浓度梯度
1.
Nitrogen concentration and nitrogen concentration gradient in the nitrided layer of 40Cr steel nitrided under the optimized parameters was calculated based on Fick\'s Second Law.
利用Fick第二扩散定律对快速离子渗氮优化工艺的富氮层进行了氮浓度、氮浓度梯度的计算。
2)  concentration gradient
浓度梯度
1.
The emulation of the concentration gradient in carburied layer is a successful application of computer technique based on the diffusion theory.
化学热处理的渗层浓度梯度仿真是计算机在扩散问题上的成功应用。
2.
Taking 40Cr alloy construction steel as reference and comparison, we use the test specimens of the arsenic content in steel of different concentration gradient to be making hot working, tension and falling weight test and discuss the impact tendency for arsenic content to hot working and mechanical properties in 40Cr alloy constructional steel.
以常用 4 0Cr合金结构钢作参比 ,以钢中砷含量不同浓度梯度的试样进行热加工、拉力、冲击试验 ,讨论砷对 4 0Cr合金结构钢热加工及机械性能的影响趋势 。
3)  concentration grads
浓度梯度
1.
There existed obviously different concentration grads of Cr and Fe between the interior and edge part of chromi.
以南非铬铁矿为原料,以在竖炉内生产含铬30%的铁水为目标,对含碳铬铁矿团块还原过程的矿相结构进行了分析,结果表明,随反应温度的升高,铬铁矿的还原向矿粒内部进一步发展,但直到球团软熔前,铬铁矿颗粒并未反应彻底,颗粒内部和边缘部分存在明显 Cr,Fe 的浓度梯度,同时表现出铁氧化物的选择性还原。
4)  Concentration gradient
梯度浓度
5)  DO concentration gradient
DO浓度梯度
6)  carbon concentration gradient
碳浓度梯度
1.
Thus,the speed of carburizing can be increased,flat carbon concentration gradient can be obtained,good hardness and metallographic structures can be found,and the quality .
通过将工件在炉内渗碳时的碳势设定为波段脉冲式,可增强工件表面对活性碳原子的物理和化学吸附作用,提高碳原子扩散系数和扩散速度,提高工件的渗碳速度,改善渗层的碳浓度梯度,使渗层碳浓度变得平缓,淬火后获得良好的硬度梯度和金相组织,提高产品的内在质量和使用寿命。
2.
05%(weight),carbon concentration gradient curve in carburized layer is smooth and shows “S” shape,the deviat.
其表面碳浓度(质量分数 )偏差 <0 0 5 % ;渗层内的碳浓度梯度曲线平滑 ,呈“S”型平台分布 ;渗层深度为 1 2mm和 1 4mm时 ,渗层深度的偏差 <0 0 5mm。
补充资料:浓度梯度
分子式:
CAS号:

性质:即浓度对扩散距离的导数,或浓度随扩散距离的变化。在双组分混合物中,组分A沿y方向进行分子扩散,依费克(Fick)第一定律可表示成:JAy为组分A在y方向上的质量扩散通量,kg/m2·s;DAB为组分A在组分B中的扩散系数,m2·s;ρ为混合物的质量浓度,kg/m3;ωA为混合物中组分A的质量分数;dωA/dy即为浓度梯度,1/m0。费克第一定律也可以表示成为如下形式:JAy为组分A在y方向上的摩尔扩散通量,kmol/m2·s;c为混合物的浓度,kmol/m3;xA为混合物中组分A的摩尔分数;dxA/dy即为浓度梯度。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条