1) H_2S and CO_2 environment
H2S和CO2环境
2) CO_2 and H_2S
CO2和H2S
1.
The harmfulness of coexistence of CO_2 and H_2S in oil and nature gas jointly corroding tubular goods is expounded.
阐述了石油天然气中CO2和H2S共同存在时对油管钢联合腐蚀的危害性,分析了CO2和H2S腐蚀的研究方向与发展趋势。
3) H2S and CO2
H2S和CO2
4) H2S
H2S环境
1.
The sulfide induced stress corrosion cracking(SSCC) behavior of the weld seam and base metal of pipeline steel X80 was investigated by using the 3-point bend loading method in H2S environment.
采用三点弯曲加载法,研究了国产X80管线钢及其焊接接头的抗H2S环境应力腐蚀开裂(SSCC)行为。
5) wet H2S environment
湿H2S环境
1.
This paper explains the stress corrosion mechanisms for pressure vessel under wet H2S environment and describes the characteristics of localized CF-62 steel material and the situation in using it,based on the conclusion of the full inspection of the Q812 tank,it develops the correct method to get rid of the crack of the Q812 tank.
本文阐述了湿H2S环境应力腐蚀机理,总结了国产CF-62钢的性能及使用状况,针对Q812罐全面鉴定的结论提出对Q812罐裂纹进行处理的方法,并对液化气球罐的建设、使用和检测提出了一些建议。
2.
The most critical damage to drilling tool was wet H2S environment.
分析了地质、材料、不当操作、加工不合格、流体介质、温度等导致钻具失效的基本因素,比较了钻具受力、工作环境及介质等因素对钻具失效的影响,得出多种因素的作用是造成钻具失效的主要原因;湿H2S环境对钻具的危害最大;硫化物应力腐蚀(SSCC)是最危险的钻具失效形式。
6) CO_2/H_2S corrosion
CO2/H2S腐蚀
1.
In order to find out the relation between corrosion time and the cathode reaction of CO_2/H_2S corrosion of tubular steels,a autoclave,together with EIS,is used to study the cathode process of CO_2/H_2S corrosion of tubular steel N80 in simulated oil well produced water under 180psi CO_2 and 2psi H_2S at 100 ℃.
为了找出油管钢CO2/H2S腐蚀的阴极反应与腐蚀时间的关系,采用高温高压釜装置,辅以交流阻抗谱(EIS)测试技术,在100℃时,CO2分压180 psi和H2S分压2 psi的条件下,对N80油管钢在模拟油田采出液中CO2/H2S腐蚀的阴极过程进行了研究。
2.
Autoclave test,together with weight loss method,XRD,SEM and EDS,were used to study CO_2/H_2S corrosion behavior of tubular steel P110 in simulated oil well produced water at 90 ℃.
采用高温高压釜试验,辅以失重法、X射线衍射、扫描电镜和电子能谱分析,对90℃时油管钢P110在模拟油井采出液中的CO2/H2S腐蚀行为进行了研究。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条