1) taping tension
绕包张力
1.
During the production of CD insulated HTS cables,the taping quality of polypropylene laminated paper(PPLP) insulation affects directly the electrical performance of the cable and the taping tension plays an important role in taping quality.
在低温绝缘高温超导电缆的制造中,聚丙烯复合纤维纸(PPLP)绝缘的绕包质量直接影响到电缆的电气性能,而绕包张力是其中关键因素。
2) Unwinding Tension
退绕张力
1.
Innovation of Unwinding Tension Control Loop of S422 Sizing Machine;
S422型浆纱机退绕张力控制回路的改进
2.
Electronic Determination of Roving Unwinding Tension and Horizontal Position Selection of Guide Rod(Sequel);
粗纱退绕张力的电测及导纱杆水平位置的选择
3.
New auto-control system for unwinding tension of warp sheets from sizing beam in re-beaming machine;
新型并轴机浆轴丝片退绕张力控制系统
3) winding tension
卷绕张力
1.
Application of DSP chip in tire cord winding tension control system
DSP芯片在帘子布卷绕张力控制系统中的应用
2.
And the winding effectiveness was improved by controlling winding tension, winding weight, travers frequency, finish application, lateral blowing, etc.
从卷绕成型的原理探讨了影响CKV453纺丝卷绕机卷绕成型的因素,通过调整卷绕张力、卷绕重锤、往复次数、上油及侧吹风等,最终改善了该纺丝机的卷绕成型。
3.
In this paper,the formation of winding tension,contralling properties and the relation between the rotation speed of leady drive motor and winding diameter are introduced.
主要从原理上阐述了粗纱卷绕张力的形成、控制实质及粗纱卷径与主传动电机转速关系 ,并采用变频器S曲线功能和转矩提升功能控制主电机软起动、缓慢停车、稳定运行 ,实现对粗纱卷绕张力的控制 ,解决了粗纱生产质量稳定问
4) winding tension
缠绕张力
1.
On the base of the mechanical analysis and mathematical deduction,the formulation of balanced winding tension in non-resin winding is put forward under determinate correlative postulates and application area.
通过力学分析和数学推导,在一定的相关假设和适应范围下,得出了干纱缠绕中均衡缠绕张力的逐层施加公式。
2.
Put forward the application of space joist-frame structure in gypsum core model frame,used the ANSYS software to do the analysis for change when bearing winding tension and inertia force,confirmed its feasibility of mechanics.
将空间桁架结构应用于石膏芯模骨架,并用ANSYS软件分析这种结构在承受缠绕张力和惯性力时的变形情况,以确定其力学可行性。
3.
During the manufacture process of the composite material barrel, residual stresswould be made with the cure temperature and the winding tension.
复合材料身管在加工过程中，由于固化温度、缠绕张力等因素的影响，在身管中产生一定量的残余应力。
5) tract and go through under tension
张力绕牵
6) tension winding
张紧力缠绕
1.
A 3D initial stress analysis model of composite flywheel fabricated by filament tension winding was put forward by using the idea of the former plane stress full elastic model.
利用平面应力型全弹性模型的思想(即将纤维束张紧力缠绕看成多层复合材料薄环连续过盈装配的过程),建立了三维纤维束张紧力缠绕复合材料飞轮初应力分析模型,并给出了基于面-面接触算法求解张紧力缠绕复合材料飞轮初应力的三维数值方法。
2.
After the consolidation of the composite ring in tension winding, the mandrel is drawn out, and then a hollow ring is formed.
纤维束张紧力缠绕的复合材料厚环固化成型以后,再抽出缠绕芯轴形成空心环,这一过程称为内孔卸载。
补充资料：绕佛
【绕佛】
（术语）西天之法。旋绕长上，表恭敬爱慕之意也。西域记二曰：“随所宗事多有旋绕，或唯一周，或复三匝。”释氏要览中曰：“绕佛亦云旋绕，此方称行道。（中略）归敬至也，唯佛法右绕。”法华经曰：“头面礼足，绕佛三匝。”
（术语）西天之法。旋绕长上，表恭敬爱慕之意也。西域记二曰：“随所宗事多有旋绕，或唯一周，或复三匝。”释氏要览中曰：“绕佛亦云旋绕，此方称行道。（中略）归敬至也，唯佛法右绕。”法华经曰：“头面礼足，绕佛三匝。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条