1) flow across facture
隙间串流
1.
Byintroducing concepts in groundwater hydraulics,considering characteristics of facture behaviors,such as continuity of flow in a fracture,coupling effect of seepage and deformation,flow across factures and storage change of fracture water,the governing equation of non-steady flow in a group of facture under injecting tests is developed.
借助于地下水动力学概念,考虑裂隙水流的连续性、应变渗透耦合效应、隙间串流、裂隙水贮存量变化等裂隙行为特征,建立了单组裂隙压水试验的非稳定渗流控制方程。
2) series gap
串联间隙
1.
With analysis of the insulation-coordination and configuration of line arresters with series gap in 220 kV transmission lines,the technical parameters of line arresters,the design principle and configuration of series gaps were determined.
通过对220kV输电线路用有串联间隙避雷器绝缘配合及结构的研究分析,提出了线路避雷器的技术参数及串联间隙的设计原则,确定了线路避雷器的间隙结构。
2.
Its series gap and four branches structure make use of reducing its applied voltage ratio, prolonging its life span, improving protect performance of the phase to phase.
通过与MOA的比较 ,介绍了TBP型过电压保护装置的结构和优点 ,即利用串联间隙的四星形连接结构 ,降低荷电率 ,延长使用寿命 ,完善相间保护性能 ,总结了运行使用中的注意事
3.
Several key problems in the application of line surge ZnO arresters were discussed in this paper, including the selection and requirements for line surge arresters, the design of polymeric housing and active part of arrester, the design of the series gaps, and their installing sites.
笔者重点讨论了线路用避雷器应用中有关线路防雷对线路用避雷器的要求、结构类型和选择、线路用复合外套避雷器本体结构及串联间隙设计、参数以及线路用避雷器的安装位置等关键技术问
3) series gap
串接气隙，串联间隙
4) clearance vortex
间隙涡流
1.
Noise and Characteristics tests are conducted on an axial flow fan and the effect of the clearance vortex of the fan is analysed.
分析了轴流式风机叶尖间隙涡流对噪声特性和气动性能的影响 ,通过试验验证了在叶片端部加装旋转环控制间隙涡流的效果 ,结果表明了加旋转环可在一定程度上降低噪声并改善气动性能。
5) gap flow field
间隙流场
1.
In this research,based on the analysis of the movement of the fluid and debris in the machining gap,the 3D simulation model of the gap flow field is setup to simulate the movement of the fluid and debris while the electrode is moving up and down.
间隙流场中加工屑的分布是影响火花放电频率和放电点分布的重要因素,并直接关系到加工速度与加工精度,对间隙流场中加工屑分布情况进行研究是提高加工速度、加工精度的重要途径之一。
6) tip clearance flow
间隙流动
1.
Effects of endwall relative motion on tip clearance flow in turbine rotors
机匣相对转动对涡轮叶顶间隙流动的影响
2.
The tip clearance flow in a cascade was numerically simulated by solving the RANS equations of incompressible fluids.
针对间隙流动的特殊性 ,采用流场分块的方法以提高网格生成质量和计算稳定性 。
3.
The aim of this paper is to present a numerical analysis of the tip clearance flow structure to evaluate its influence on the turbine\\'s aerodynamic performances.
应用数值方法对某型向心涡轮的可调导叶间隙流动结构及其涡轮性能的影响作了分析,间隙尺寸分别为1%、2%、4%叶高。
补充资料：隙间
1.亦作"?间"。 2.空隙。引申指不完美处。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条