说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 镀锌板镀层
1)  the coating of galvanized plate
镀锌板镀层
1.
Determination of trace cadmium in the coating of galvanized plate by hydride generation atomic fluorescence spectrometry
氢化物发生-原子荧光光谱法测定镀锌板镀层中痕量镉
2)  galvanized sheet
镀锌薄板,镀锌铁
3)  galvanized sheet
镀锌薄板
4)  galvanized steels
镀锌板
1.
The passivation technology of galvanized steels were reviewed in details,specially the development of research on organofunctional silanes films and their anti-corrosion performance.
综述了有机硅烷的结构、分类、钝化工艺和缺陷,以及有机硅烷在镀锌板上的研究进展和耐蚀性能。
5)  galvanized steel
镀锌板
1.
The effect of shielding gas type on laser weldability of galvanized steel;
保护气体种类对镀锌板激光焊接性的影响
2.
88mm galvanized steel,T-joint type,0.
88mm厚的镀锌板进行了激光钎焊实验,采用T形接头形式,焊丝为0。
3.
The zinc distribution and corrosion resistance of the laser-welded joint of galvanized steel were investigated.
研究了镀锌板激光焊接接头锌的分布及焊接接头耐蚀性能。
6)  galvanized sheet steel
镀锌钢板
1.
The commercial hot-dip galvanized sheet steel was investigated for its corrosion behavior in three different seawater zones in Qingdao with electrochemical measurement,weight loss test and SEM.
开展了热镀锌钢板在青岛不同海水区带的实海腐蚀测试,并利用电化学测试、失重腐蚀测试和扫描电镜研究了镀层的海水腐蚀行为。
2.
With the rapid development of Chinese economy, demands for galvanized sheet steels increased significantly because of the rapid development of construction and automotive industry during the last decade.
随着国内经济的持续稳定发展,在过去的10年中,由于建筑和汽车行业的快速发展,对镀锌钢板的需求持续旺盛。
3.
occured in forming and after coating of the prephosphating galvanized sheet steel,this paper demonstrates analyses on all kinds of influential factors happened in production and forming in detail,after that,provides some solutions on purpose.
为解决预磷化镀锌钢板加工成形、涂装后易出现的条影、针孔、粗糙等问题,对其生产及加工成形过程中的各种影响因素进行了详细分析,并有针对性地提出一般的解决办法。
补充资料:薄板涂镀机组安装


薄板涂镀机组安装
erection of sheet coating unit

bobon tudu Jjzu onzhuang薄板涂镀机组安装(erection of sheet coat-ing unit)薄板涂镀机组是指对厚度。.3~2.5mm冷、热轧带钢表面进行涂镀的连续流水生产线.徐层分单面涂层和双面涂层,徐层的涂料、厚度、色彩根据用户需要而定。镀层分热镀和电镀两种形式,镀层的材料主要是锌和锡。电镀可单面镀,也可双面镀,热镀只能双面镀。 涂镀机组生产线,一般都由进口段、工艺段和出口段组成。进口段主要包括开卷机、矫直机、焊接机、进口活套装置、张紧辊和纠偏辊等;工艺段主要有清洗装置、表面处理装置、涂镀装置、干燥冷却装置等;出口段主要有出口活套装置,检验、打印、剪切、涂油设备、卷取机,包装打捆装置等。 安装顺序见图。 安装方法涂镀机组的工艺布!特点是:流水作业线长;设备布置紧凑,带辊子、卷筒的设备较多,安装精度达不到要求时容易引起带钢在行进过程中跑偏。针对这一情况的主要安装方法是: (1)采用座浆垫铁,以解决机组布里紧凑、标高难以调整的困难。 (2)将整条生产线分成几段同时安装,各工种交叉配合,协同施工,以加快施工进度。誓 涂镀机组安装顺序图 (3)对工艺钢平台采用预组装后整体吊装。 (4)采用摇臂法找正各设备上的工作辊或卷筒轴线与作业中心线的垂直度,以解决带钢的跑偏问题。开卷机、矫直机、张紧辊、涂镀主机、卷取机等主要设备与作业中心线的垂直度偏差要求为。.05一0.10/1000。 试运行机组中各单机分别试运行后,按作业程序进行进口段、工艺段、出口段的无负荷联动试运行,再进行整个流水作业线的无负荷联动试运行。最后进行钢卷穿带作业的负荷联动试运行。 (黄仁钮)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条