1) porous structure of artificial bone
人造微孔骨结构
1.
By transforming the three direction DEXEL model of polyhedrons into its VOXEL model and setting transparency attributes of VOXELs,the porous structure of artificial bone can be designed.
通过将多面体三向DEXEL模型转换为小体素模型,并设置小体素的透明度属性为全透明,实现人造微孔骨结构设计。
2.
By setting transparancy attributes of VOXELs,the porous structure of artificial bone can be designed.
通过设置小体素的透明度属性为全透明,实现人造微孔骨结构设计。
2) micro-pipe of the artificial bone
人工骨微管结构
3) bone microstructure
骨微结构
1.
Objective To investigate the changes of bone density,bone microstructure,bone BMP-2 expression in rats at early period of diabetes.
目的观察糖尿病大鼠早期的骨密度、骨微结构改变及骨组织中BMP-2基因的表达。
2.
Osteoporosis is characterized by low bone strength,which results from both low bone mass and deteriorated bone microstructure.
骨矿密度的降低与骨微结构的退化都会导致骨强度的下降,从而引发骨质疏松。
4) bone microarchitecture
骨微结构
1.
Pharmacological GC-induced bone loss,another aim of our study was to characterize the effects of LC on BMD and bone microarchitecture of GC-induced bone loss rat model.
本实验通过LC干预小鼠成骨细胞系MC3T3-E1,探讨LC对无血清及糖皮质激素(GC)诱导的MC3T3-E1凋亡的影响;以GC干预制备骨丢失大鼠模型,同时补充LC,观察LC对骨丢失模型大鼠的骨密度(BMD)和骨微结构的影响。
5) microstructure
[英]['maikrəu,strʌktʃə] [美]['maɪkro,strʌktʃɚ]
微孔结构
1.
The relations between diluent kinds,concentration of the polymer,cooling condition,additive et al and phase diagram,microstructures .
热致相分离法是一种制备微孔结构材料的新方法,采用该方法可以将常温下缺少合适溶剂的高聚物制成多孔材料。
2.
The layer structure and the microstructure of PP hollow fiber membrance were observed by SEM and TEM,and the main structure feature of microstructure of PP hollow fiber membrane used in MO was obtained.
采用扫描电子显微镜法和透射电子显微镜法对聚丙烯(PP)中空纤维膜的层结构和微孔结构进行了微观观测,测得膜式氧合器用PP中空纤维膜的主要结构特征为:中空纤维属于不对称膜;其横断面分为2层,皮层为多孔结构,支持层为海绵状结构;皮层为开放式表面,由很多不规则长条状微孔组成;微孔分布具有方向性,沿纤维轴向排列;孔的整体分布比较均匀,分布比例较高。
3.
In addition,microstructure can also change greatly with variation of calcination temperature.
采用溶胶-沉淀法制备了二氧化钛光催化剂,考察了煅烧温度对二氧化钛晶型、粒径及微孔结构等的影响,利用XRD和氮吸附/脱附对其进行了表征。
6) porous structure
微孔结构
1.
The influences of coating condition and the content of pore-forming agent on the porous structure and the vapor permeation were studied.
研究了湿法涂层技术制备聚氨酯 (PU )多孔膜的工艺条件以及致孔剂含量对多孔膜微孔结构和透湿性能的影响。
2.
Describes the application of computer image analyzing system with the microscope in measuring porous structures of ultra-high buming rate propellants.
探讨了微机显微图象分析仪在测定超高燃速推进剂微孔结构方面的应用，并对推进剂固体粉末组分平均粒径及其分布进行了测定，还初步探索了测定推进剂制成品的断面结构状况，以判断工艺混合均匀性的可能。
补充资料：人造
1.人工制造。与"天然"相对。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条