1) fiber critical aspect ratio
纤维临界长径比
1.
A Mathematics model of the fiber critical aspect ratio of short-fiber-reinforced elastomer m matrix composites with viscoelastic interphase was established,and expressions of the fiber critical aspect ratio at the initial time and long time were obtained under different failure modes of interphase.
建立了含粘弹性界面相短纤维/弹性体复合材料的纤维临界长径比理论模型,得到了不同界面相破坏形式下初始和长时的纤维临界长径比,并讨论了界面相剪切强度、界面相剪切松弛变量、界面相厚度等诸多参数对纤维临界长径比的影响。
2) critical aspect ratio
临界长径比
1.
Based on the theoretical model for the elastic modulus of short fiber-reinforced composite,the critical elastic modulus of short fiber-reinforced metal matrix composites was proposed and an analytical expression for the relationship between the critical elastic modulus and the critical aspect ratio of the fiber and other material parameters was derived.
基于短纤维增强金属基复合材料弹性模量理论模型,提出了弹性模量临界值的定义,并建立了可用于预测计算的纤维临界长径比和材料参数之间的解析函数。
3) fiber length-diameter ratio
纤维长径比
4) critical fiber length
临界纤维长度
1.
Based on the single-fiber composite fragmentation (SFC) test of single fiber reinforced epoxy matrix composites treated by four types of surface treatments, the interfacial adhesion conditions were estimated and analyzed according to the critical fiber length, interfacial shear strength and the single fiber microdamge mode in the SFC test.
对不同表面处理剂处理的4种单纤维增强环氧基复合材料进行了断裂实验,从临界纤维长度、界面剪切强度和单纤维断裂实验中纤维断点周围基体形貌三方面对纤维和基体之间的界面粘结性能进行了分析和评价。
5) fibre critical length
纤维临界长度
1.
The results show that the data from simulation are consonant with the actual tests’performance parameters, such as interface shear strength and fibre critical length, and the process of the interface debonding is found.
结果表明,软件模拟计算所得单纤维复合材料的界面剪切强度和纤维临界长度等性能参数与实验测试所获得数据一致,并可以获得界面破坏机制。
6) steel fiber ratio of length to diameter
钢纤维长径比
补充资料：纤维
分子式：
CAS号：
性质：工业上指柔韧、纤细的丝状物。具有相当的长度、强度、弹性和吸湿性等。都是高分子化合物。大多数是有机物质，少数是无机物质。根据来源可分为两大类：天然纤维和化学纤维。
CAS号：
性质：工业上指柔韧、纤细的丝状物。具有相当的长度、强度、弹性和吸湿性等。都是高分子化合物。大多数是有机物质，少数是无机物质。根据来源可分为两大类：天然纤维和化学纤维。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条