1) 1100 aluminum alloy plate
1100铝合金板
1.
Tensile test was performed to get different plastic strain ratios of 1100 aluminum alloy plates caused by three kinds of cold rolling process,which were treated with fitting processing based on the anisotropic distribution function,the texture was detected by means of the orientation distribution functions(ODF) and compared with the earring ratio of final cup-shaped parts.
采用拉伸试验测定了三种不同冷轧工艺生产的1100铝合金板的塑性应变比,并通过各向异性分布函数对其进行了拟合处理;同时采用晶体取向分布函数(ODF)对其织构进行了检测,最后与拉深试验中的制耳率进行了对比,确定了合理冷轧生产工艺。
2) 1100/3004/1100 aluminium alloy composite strip
1100/3004/1100铝合金复合板带
4) aluminum 1100 (Al-1100)
铝1100
5) aluminum alloy sheet
铝合金板
1.
Parameter prediction of bending of aluminum alloy sheet induced by laser prompt heating;
铝合金板快速加热弯曲的参数预测
2.
Tribotest at drawbead in aluminum alloy sheet warm forming;
铝合金板温成形过程中拉深筋处摩擦的测量
3.
Finite element analysis on mechanical behavior of adhesive joint of steel sheet and aluminum alloy sheet;
钢板与铝合金板胶接接头力学性能的有限元分析
6) aluminum alloy plate
铝合金板
1.
Center-cracked aluminum alloy plates were adhesively one-side bonded with unidirectional carbon/ epoxy composite patches by vacuum-bagging process.
利用袋压工艺、采用单向碳纤维/环氧复合材料补片对含中心裂纹的铝合金板进行了修补,测试了胶接修补前后板的静态力学性能和疲劳性能。
2.
The aluminum alloy plate for adhesive bonding was anodized in the solution of phosphoric acid and its adhesion performance was studied.
采用磷酸电解质对铝合金板进行了阳极化处理并测试了其胶接性能,测试了阳极化过程中铝合金板的基本力学性能,观察了阳极化处理后的铝合金板的表面形貌,分析了阳极化处理后铝合金粘接副的胶接界面、拉伸剪切失效模式。
3.
ANSYS finite element analysis method was adopted to analyze the rigidity of a center holed aluminum alloy plate, and to investigate the influence of hole on rigidity and stress area disturbed.
用ANASY有限元分析软件对复合材料修复铝合金结构的刚度进行数值分析,研究了开孔损伤对铝合金板结构刚度和应力扰动区范围的影响。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条