1) combin gateway and pillar with fully mechanized top cawing mining
巷柱-综采放顶煤
1.
Refencing these advantages which are fully mechanized top cawing mining and gateway and pillar top coal caving for steep inclined thick or special thick seam in China , from that, the paper put forward a combin gateway and pillar with fully mechanized top cawing mining technology in steep inclined special thick seam with a thickness form 10 to 20 m.
综合我国急倾斜煤层水平分层综采放顶煤和水平分段巷柱式放顶煤两种采煤方法的技术优点,提出在厚度10~20m的急倾斜煤层内使用"巷柱-综采放顶煤"开采技术。
2) roadway caving mining
巷柱式放顶煤
1.
A mechanics model of top coal is built up according to the roadway layout manner of roadway caving mining in 3.
5~10m大倾角煤层巷柱式放顶煤开采巷道布置方式,建立顶煤体力学模型。
3) roadway caving method
巷道放顶煤开采
1.
Based on the application of artificial neural networks method, it sets up the artificial neural networks model for the evaluation on the degree of difficulty of top coal caving of roadway caving method in steep medium-thickness and high seam The model is made use of forecasting the technical-economic indexes of coal face and optimizing the technological parameters of roadway caving metho
应用人工神经网络方法，建立了急倾斜中厚－厚煤层巷道放顶煤开采可放性评价的人工神经网络模型。
4) fully mechanized top coal caving mining
综采放顶煤
1.
Analysis on coal mining rate of fully mechanized top coal caving mining in Kailuan Mining Area;
开滦矿区综采放顶煤工艺煤炭采出率的分析
2.
In order to study the overburden strata failure law and water conducted fracture zone development law under the condition of the fully mechanized top coal caving mining in Lu \'an Mining Area,three high level survey boreholes in the roof caving zone and the water conducted fracture zone were made in the 6206 fully mechanized top coal caving mining face in Wangzhuang Mine.
为了研究潞安矿区综采放顶煤条件下覆岩破坏规律和导水裂缝带发育规律,在王庄煤矿6206综放工作面施工了3个"两带"高度观测孔,进行了系统的观测研究,取得了冒落带、导水裂缝带发育高度,求取了预测导水裂缝带最大高度的经验公式。
6) Fully mechanized coal caving
综采放顶煤
1.
Research of coupled relation between fully mechanized coal caving mining and outburst;
综采放顶煤与瓦斯突出的耦合关系研究
补充资料：柱式
柱式
一种建筑结构的样式。它的基本单位由柱和檐构成。柱可分为柱础、柱身、柱头（柱帽）三部分。由于各部分尺寸、比例、形状的不同，加上柱身处理和装饰花纹的各异，而形成各不相同的柱子样式。古典柱式是西方古典建筑的重要造型手段。典型的古典柱式包括希腊时期的3种，共有5种：多立克式、爱奥尼克式、科林斯式、塔司干式、复合式。其中塔司干式和复合式是在前三种希借柱式的基础上发展起来的两种罗马柱式。多立克式柱身比例粗壮，由下而上逐渐缩小，柱子高度为底径的4-6倍。柱知刻有凹圆槽，槽背成棱角，柱头比较简单，无花纹，没有柱础而直接立在台基上檐部高度的比例为1：4，柱间距约为柱么匠1.2至1.5倍。爱奥尼克式的柱身比例修长，上下比例变化不显著，柱子高度为底径的9至10倍，柱身刻有凹圆槽，槽背呈带状，有多层的柱础，檐部高度与柱高的比例为1：5，柱间距为柱径的2倍。科林斯工除了柱头如盛满卷草花篮的纹饰外，其它各部分与爱奥尼克式相同。塔司干式的柱身比例较粗，无圆槽、有柱础的一种简单柱式。复合式则在科林斯式柱头上加上一对爱奥尼式的涡卷，柱式趋向华丽、细密、纤巧和豪华。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条