1) combustor flow field measure
燃烧室流场测量
2) combustion flow field
燃烧流场
1.
In order to study the influence of the flame- holder layout on the outlet temperature distribution,combustion efficiency and total pressure loss,the numerical simulation of combustion flow field for a ramjet combustor was completed.
为了研究不同火焰稳定器布局对燃烧室流场特征和燃烧性能的影响,对某型亚燃冲压发动机燃烧室的三维湍流燃烧流场进行了数值模拟。
2.
The performance of the combustion flow field at the three conditions was analyzed for the gas turbine annular combustor.
根据改型后燃气轮机的结构特点建立了真实的三维计算几何模型;计算中采用SIMPLE算法,可利用k-ε双方程湍流模型、六通量辐射模型、非绝热概率密度函数(PDF)燃烧模型及热力型NO模型对燃烧流动进行数值模拟,分析了燃气轮机环形燃烧室在3种状态下燃烧流场的性能。
3.
The numerical simulation of combustion flow field for the plasma generator was performed by using eddy break up(EBU) combustion model,k-ε two-equation turbulent model and SIMPLEC algorithm.
采用漩涡破碎(EBU)燃烧模型、k-ε双方程湍流模型及SIMPLEC算法,对等离子发生器内部的燃烧流场进行了数值模拟,得到了关于等离子燃烧流场相关特性参数分布。
3) swirl combustor
旋流燃烧室
1.
A test facility for swirl combustor with coaxial jets and staged air injection was designed, fabricated, and set up.
建立了采用分级进风方式的同轴射流旋流燃烧室实验装置,选用耐高温的氧化铝细粉作为示踪粒子,实现了用三维激光粒子动态分析仪(PDA)测量湍流旋流燃烧的热态瞬时速度场。
2.
For the purpose of developing swirl combustors with high combustion efficiency and low pollutant emission, a numerical simulation of swirling turbulent flows in a swirl combustor with coaxial jet interactions is performed.
针对发展高效低污染旋流燃烧技术的需要 ,对旋流燃烧室内两股同轴旋转射流相互作用的湍流旋流流动进行了数值模拟 。
3.
A presumed probability density function(PDF) model for temperature fluctuation is proposed and formulated in this paper to simulate propane turbulent four-step reaction,which model is employed to numerically simulate propane turbulent combustion in a swirl combustor.
应用该模型对旋流燃烧室内的丙烷湍流燃烧进行了数值模拟。
4) reverse flow combustor
回流燃烧室
1.
Numerical simulations of two-phase reacting flow in an annular reverse flow combustor were developed in a three-dimensional non-orthogonal curvilinear coordinate system.
在三维任意曲线坐标系下数值模拟回流燃烧室火焰筒内两相燃烧过程,采用RNGk-ε模型模拟紊流粘性、EBU-Arrhenius模型模拟燃烧反应速率、离散坐标模型以及六通量模型考虑辐射传热,液相采用颗粒轨道模型,气相采用SIMPLE算法求解,并用PSIC算法考虑气液两相之间的相互作用的影响,计算得到燃烧室内速度、温度等各气流参数分布。
5) annular combustor with slinger
折流燃烧室
1.
Performance experiment of a reflection flow annular combustor with slinger;
以某离心甩油折流燃烧室为研究对象,采用试验的方法,在不同的甩油盘转速下对其性能进行了研究。
6) Swirl Combustion Chamber
旋流燃烧室
1.
Experimental study on the turbulent flow in a swirl combustion chamber by using particle image velocimetry;
旋流燃烧室内湍流流动的PIV实验研究
2.
Investigation on the three-dimensional isothermal flow field in a swirl combustion chamber;
旋流燃烧室内三维等温流场研究
补充资料：沸腾床燃烧(见流化床燃烧)
沸腾床燃烧(见流化床燃烧)
boiling-bed combustion:see fluidized-bed combustion
沸腾床燃烧(boiling一bed eombustion)见流化床燃烧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条