1) magnitude of serration
锯齿幅值
1.
The magnitude of serration and the critical strain of the serrated flow are analyzed and the results show that the diffusing solute atoms are necessary for the appearance of PLC effect while the cutting of the precipitate particles alone can not lead to this phenomenon.
将这些试样分别在低温(-100℃)和室温(25℃)下进行拉伸实验,分析其锯齿幅值和临界应变随应变率的变化趋势。
2) amplitude of serration
锯齿幅度
3) demodulating method of gear
齿轮幅值解调
1.
This Paper introduces the system of condition monitoring,the demodulating method of gear,And trigger collection vibration signal,the system of condition monitoring is very successful in fault diagnosis in 4-Stands continue cold roll mill.
介绍了振动在线监测系统的研制、齿轮幅值解调方法及振动信号的采集触发,并在四机架冷连轧机组上得到了成功的应用。
4) saw tooth
锯齿
1.
Preliminary study on the wear and blunting of tungsten carbide tipped saw tooth;
硬质合金锯齿磨损变钝初步研究
5) sawtooth
[英]['sɔ:tu:θ] [美]['sɔ,tuθ]
锯齿
1.
A Method of Video Processing that is Used to Eliminate Sawtooth and Suited forHardware Implementation;
一种便于硬件实现的消锯齿的视频处理方法
2.
In order to study the characteristic of the new configuration plasma aerodynamic actuator, Under normal atmosphere environment, Experimental Investigation on sawtooth plasma Aerodynamic actuator is done, frequency-discharge voltage-discharge current-power current and the boundary velocity induced by the pl.
为研究新型布局的锯齿等离子体气动激励器的放电特性与加速效应,在常规大气环境下测量了不同激励参数下的频率—放电电压—放电电流—电源电流以及等离子体气动激励器诱导的边界层速度。
3.
When a binary digital image,which includes only two kinds of color,is magnified with the existing methods,the object borders always look blurred and sawtooth,so a new method is proposed which is fit for the binary digital image.
采用一般方法放大二值数字图像,会导致图像的边缘出现模糊与锯齿现象,为此提出一种适合于放大二值数字图像的新算法;采用近邻取样法将图像放大到指定的倍数,通过搜索输入图像确定所有锯齿区域,将其映射到输出图像并进行区域填充;实验结果表明,该算法用于二值数字图像的放大能使图像边缘保持清晰与光滑,与其他方法相比具有明显的优势。
6) aliasing
[英]['eiliəsiŋ] [美]['eliəsɪŋ, 'eljə-]
锯齿
1.
The cause of self-shadow and aliasing are also explained mathematically.
针对shadowmap算法,论述其基本原理,从数学角度解释自阴影以及锯齿现象出现的原因,利用z偏移和增加深度信息精度来解决自阴影现象,提出一种多次采样的算法来平滑阴影,消除锯齿影响,并基于DirectX3D实现,通过测试证明算法的可行性。
补充资料：Anti－aliasing(抗锯齿处理)
anti－aliasing (抗锯齿处理)
简单地说主要是应用调色技术将图形边缘的“锯齿”缓和，边缘更平滑。抗锯齿是相对来来说较复杂的技术，一直是高档加速卡的一个主要特征。目前的低档3d加速卡大多不支持反锯齿。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条