1) multi-homogenizing process
多级均匀化处理
2) uniform heat treatment
均匀化处理
1.
The microstructure and tensile properties of magnesium alloy ZK60 after uniform heat treatment and extrusion + aging treatment were investigated and were compared with those of the alloy as-cast.
结果表明,铸态ZK60合金经450℃×14h均匀化处理后,得到几乎单相固溶体,伸长率较铸态提高80。
2.
In this paper,the experiments of uniform heat treatment at different temperature and time were carried out on the ingots of Mg-Y-Nd-Zr alloy.
本文对 Mg-Y-Nd-Zr 合金铸锭在不同温度和时间下进行均匀化处理,采用金相显微镜、X-Ray 衍射和扫描电镜及能谱分析仪对合金不同状态下的微观组织和成分进行观察分析。
3) homogenizing
[英][həu'mɔdʒənaiz] [美][ho'mɑdʒə,naɪz]
均匀化处理
1.
Effects of 5083 aluminium alloy ingot homogenizing on properties and structures of ingot and plates;
5083铝合金铸锭均匀化处理对铸锭和板材组织与性能的影响
2.
The results show that comparing with as-cast, the alloy after homogenizing have a high percentage of area reduction,but its tensile strength decreased obviously;when the deformation temperature in 300℃420℃,The percentage of area reduction showed a trend of first increase and then decrease,and has a maximum value in 380℃-400℃,Tensile strength showed a degressive trend of similar lines.
均匀化处理的合金,在应变速率为0。
4) homogenization treatment
均匀化处理
1.
Effect of homogenization treatment on the hardness and electro-conductivity of as-cast Al-Zn-Mg-Sc alloy
均匀化处理对铝-锌-镁-钪铸态合金硬度和电导率的影响
2.
Effects of Homogenization Treatment on Microstructure and High Temperature Deformation Behavior of As-cast AZ80 Magnesium Alloy
铸态AZ80镁合金均匀化处理及高温塑性研究
3.
The homogenization treatment showed that the LFEC ingot has a better homogenization effect than conventional DC ingot.
利用低频电磁铸造工艺制备了具有细小、均匀等轴晶组织的7050铝合金铸锭,研究了均匀化处理过程中铸锭微观组织及性能的变化。
5) homogenizing treatment
均匀化处理
1.
Research on homogenizing treatment process for 3004 aluminum alloy ingot
3004铝合金铸锭均匀化处理工艺研究
2.
The constituent of the Φ 201 mm semicontinuous casting ingot of 7050 aluminum alloy and their evolution during homogenizing treatment at 470 ℃ were studied by means of differential scanning calorimeter(DSC), optical microscope(OM), scanning electron microscope with energy dispersive X-ray spectroscopy(SEM-EDS) and X-ray diffraction(XRD) analysis.
采用DSC、金相、扫描电镜及能谱分析、X射线衍射相分析等方法,研究了7050合金Φ200mm半连续铸锭的结晶相及其在470℃均匀化处理过程的变化规律。
3.
Three methods were used to fabricate C_f/Ti-Al composites for application of continuous fiber reinforced titanium aluminide matrix composites in the fields of aeronautics and astronautics: pressure infiltration, pressure infiltration-homogenizing treatment and mechanical alloying-pressure infiltration.
本文以连续纤维增强金属间化合物基复合材料在航空航天领域中的应用为背景,通过压力浸渗一步法、压力浸渗-高温扩散-均匀化处理三步法、机械合金化-压力浸渗二步法三种方法制备了C_f/Ti-Al复合材料,利用扫描电镜、透射电镜、拉伸试验、三点弯曲试验、均匀化处理等多种手段,较为系统地研究了复合材料的组织特征、力学性能及其影响因素。
6) homogenization
[,həʊmədʒənaɪ'zeɪʃən]
均匀化处理
1.
Effect of technology and homogenization on the magnetic properties of Nd_(12.6)Fe_(69.3)Co_(11.6)B_(6.0)Al_(0.5) permanent magnetic powder by HDDR process;
HDDR工艺条件及均匀化处理对Nd_(12.6)Fe_(69.3)Co_(11.6)B_(6.0)Al_(0.5)合金磁性能的影响
2.
For this alloy the homogenization of the ingot, the solution of the hot rolled plate and the ageing treatment of the pre-strained plate have been studied by means of tensile test, conductance measurement, exfoliation test, metallographic microscopy, scanning electron microscopy, transmission electron microscopy .
6Cu铝合金,借助于力学性能、电导率和抗剥落腐蚀性能的测定以及光学金相显微镜、扫描电镜和透射电镜组织观察和微区能谱分析等手段,对其半连续铸锭均匀化处理、热轧板的固溶处理以及预拉伸板的时效处理进行研究,优化该合金生产过程的几个主要热处理条件,为建立高纯Al-6。
3.
The solid solution decomposed to form Al3Er phase in the course of homogenization.
采用金属型水冷模铸造制备了不同含铒量的Al-Er二元合金,通过对均匀化处理实验合金的电导率和显微组织的分析,研究了Er在纯铝中的固溶度。
补充资料：均匀化
分子式：
CAS号：
性质：又称均匀化。一种物质在另外一种物质中搅拌使浓度发生改变的过程。匀化过程的结果是使物料浓度在过程的终点达到要求的均匀度。
CAS号：
性质：又称均匀化。一种物质在另外一种物质中搅拌使浓度发生改变的过程。匀化过程的结果是使物料浓度在过程的终点达到要求的均匀度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条