1) cross section area of casting bar
铸坯截面积
1.
of cross section area of casting bar for SCR continuous casting & rolling production line on quality of copper rod for electrical application has been studied systematically in this paper.
本文研究了SCR连铸连轧生产线铸坯截面积的大小对电工用铜线坯的延伸率、断线率等性能的影响,发现铸坯截面积越大,由其经热轧得到的铜线坯塑性越好,断线率越低,并对这一规律进行了系统的分析。
2) surface of continuous casting billets
铸坯表面
1.
Photoemissivity is an important factor to the measurement accuracy by optical thermometry for the surface of continuous casting billets,while the oxide skin thickness affects greatly the photoemissivity in the measuring process.
发射率是铸坯表面温度测量精度的一个重要影响因素,在连铸表面测温现场应用过程中氧化层又是影响发射率的主要因素,根据波传播理论建立了铸坯表面辐射的多层模型,研究铸坯氧化层厚度变化对其发射率的影响。
3) Cross Section of CC Billet
连铸坯断面
4) sectional area
截面面积
1.
During the forward filling process,the sectional area.
在正向充填过程中,对没有内浇道的铸型,熔体在横浇道内的截面面积随充填长度的增加而逐渐减小,当横浇道侧壁存在内浇道时,熔体通过内浇道进入型腔,导致熔体在内浇道入口处产生速度降,熔体横截面面积在该处有所回升,然后随充填长度的增加而减少。
5) hot spinning barrel
喷射沉积铸坯
6) cross section area
横截面积
1.
Calculation of cross section area of n-Butanol molecule by immune evolutionary algorithms;
用免疫进化算法(IEA)计算正丁醇分子的横截面积
2.
Objective To study the significance and methods of measuring volume of vertebral canal in spinal injury,and the relative relationship of the decline of vertebral canal volume and the decline of cross section area with the Spiral CT.
目的 探讨脊柱创伤后椎管容积变化的测量方法以及椎管容积下降对脊髓功能的影响 ,分析椎管横截面积下降与椎管容积下降的相关关系。
补充资料：衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条