1) dry quenched coke power generation
干熄焦发电
1.
The operation parameters of Jinan Steel’s 150 t/h dry quenched coke power generation system did not achieved design index- es and the generated energy has the space promoted.
济钢150t/h干熄焦发电系统运行参数没有达到设计指标,发电量有提升的空间。
2) dry quenched coke
干熄焦
1.
Application of HOLLiAS-MACS System in Dry Quenched Coke Electric Plant;
HOLLiAS-MACS系统在南钢干熄焦发电的应用
2.
1 dry quenched coke equipment in Laigang are presented,with an emphatic analysis of the tech-economical situation in the running of the equipment,putting forward its developmental direction.
介绍莱钢1#干熄焦装置工艺技术特点,分析了投产以来的运行技术经济状况并提出发展方向。
3.
The paper introduces the construction and the function of the control system of the dry quenched coke built in the Coking Plant of Baotou Steel,and indicates the water control system of boiler and the water regulating systems of single and three impulse.
文章简要介绍了包钢集团公司焦化厂新建二套干熄焦(CDQ)过程控制系统的构成、系统功能。
3) dry quenching
干熄焦
1.
Analysis on running of gas circulating system in dry quenching system;
干熄焦系统中气体循环系统的运行分析
2.
Application of industrial ethernet and FCS technology in dry quenching system;
工业以太网和FCS技术在干熄焦系统中的应用
3.
Mending the bracket with ceiling technology is put forward to meet demand of production from scheme selection, condition and solution based on the damages of the bracket in overhauling 140t dry quenching.
结合我厂140吨干熄焦装置年修中发现的斜道区牛腿损坏情况,从方案比选、现场状况、处理办法进行分析,提出采用吊顶技术进行牛腿修补办法,满足了生产需要。
4) CDQ
干熄焦
1.
Research on CDQ Collection Performance of a Baffle Dust Catcher by Numerical Simulation;
干熄焦挡板除尘器除尘性能的数值模拟
2.
Application of CDQ Dedusting Technology at Jigang;
干熄焦除尘技术在济钢的应用
3.
Transformation of Nitrogen Circulating System in CDQ Project at Jigang;
济钢干熄焦氮气循环系统改造
5) coke dry quenching
干熄焦
1.
Research to Coke Dry Quenching Control System Based on Fieldbus of PROFIBUS
基于PROFIBUS现场总线的干熄焦控制系统研究
2.
Brief discussion about application of 150t/h coke dry quenching technique in BXSTEEL 6~#、7~# coke oven
150t/h干熄焦在本钢6~#、7~#焦炉的应用
3.
In this paper coke dry quenching antioriginal coke wet quenching are compared,and it is proved that coke dry quenching is one kind of new energy saving technology that should be popularized.
对干熄焦和湿法熄焦进行了对比的概况进行了对比,验证了干熄焦技术是一项值得推广的技术。
6) coke dry quenching(CDQ)
干熄焦
1.
The status quo of development of the Coke Dry Quenching(CDQ)waste-heat boiler at home and abroad was mainly introduced in this paper.
主要介绍国内外干熄焦余热锅炉的发展现状,随着能源短缺和不断增长的能源需求量,指出其向系列化、大型化、高参数发展应为必然趋势。
2.
The principle of serial adjust of primary steam temperature for coke dry quenching(CDQ) furnace and the mode designed by An shan academe are introduced in this paper.
介绍干熄焦主蒸汽温度串级调节的原理和鞍山焦耐院设计的数据模型,分析了其缺点,提出了改进方案,并对改进的数据模型进行了验证。
补充资料：干法熄焦
干法熄焦
coke dry quenching
①节能效益。据1988 年实测，宝钢干熄焦 各种技术指标的设计 值与实际值的对比见 表1。 回收红焦显热产 生的蒸气量，经过汽 轮机抽汽及凝汽运行 后，其外供焦化厂的 中压蒸气和汽轮机的 抽汽量以及该汽轮机 发电量为千熄焦的能 量收益;而干熄焦设 备运转所消耗的能源 为干熄焦能耗支出， 收益和支出之差，就 是干熄焦运行的节能 效益。干熄焦消耗的 能源操作实绩和设计 指标见表2。 按照表2的数据进行核算:其吨焦汽化率设计指标的上限相当吨焦回收能量约53kgce/t·c。实绩比设计高出32碑%，这是干熄焦中烧去部分焦末，因而降低0.98%的成焦率为代价所取得的;其次表现在干熄焦净节能效益(即能量收人和支出之差)设计值为36kgce八·c，实绩为52kgc。八·e。表2宝钢干熄焦装置能耗指标┌───────────┬────┬────┬──────┐│卜于之 │设计指标│1988年 │实绩/设计 ││ │ │ 实绩 │ (%) │├───────────┼────┼────┼──────┤│汽化率(kg/t·e) │420~450 │598 │ 142，4~ ││电耗(kw.h/t·c) │ 20 │ 22.3 │ 123.9 ││氮耗(m3/t·c) │ 4 │ 5 .38 │ 111.5 ││纯水(kg/t·c) │ 450 │610 │ 134.5 ││低压蒸气耗量(kg八·c) │ 80 │ 72 │ 135.6 ││焦炭烧损 │ / │ / │ 90 ││焦炉成焦率% │ 73.5│ 72.78 │ / ││ │ │ │ 99.02 │└───────────┴────┴────┴──────┘注:表中t一代表吨焦;氮耗指标准状态下的m“数 ②提高了焦炭质量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条