1) spur bevel gear
直齿圆锥齿轮齿
1.
Finite element analysis on the dynamic stress at the tooth root of a spur bevel gear
直齿圆锥齿轮齿根动应力有限元分析
2) straight tooth bevel gear
直齿圆锥齿轮
1.
Finite element analysis of maximum rolling pressure of rotary roll forming for straight tooth bevel gear;
直齿圆锥齿轮摆辗成形最大辗压力的有限元研究
2.
The failure form of rotary roll cavity die for straight tooth bevel gear was analyzed,and the finite element simulation method was employed to change the processing parameter of rotary roll.
分析齿轮摆辗凹模的失效形式,并且通过改变直齿圆锥齿轮摆辗的工艺参数的有限元模拟,探讨了凹模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响以及对凹模失效形式的影响。
3.
Through to skewed tooth bevel gear bending stress and contact stress analysis,and comparison with the straight tooth bevel gear,summarizes the skewed tooth bevel gear\'s transmission characteristic,the load bearing superiority and the application prospect.
通过对斜齿圆锥齿轮弯曲应力和接触应力的分析,并与直齿圆锥齿轮进行比较,总结出斜齿圆锥齿轮的传动特点、承载优势和应用前景等。
3) straight bevel gear
直齿圆锥齿轮
1.
Numerical simulation study on precision forging technology of straight bevel gear;
直齿圆锥齿轮精锻成形工艺数值模拟研究
2.
Program design for the three-dimension parametric straight bevel gear based on Pro/E wildfire 2.0;
基于Pro/E Wildfire 2.0的直齿圆锥齿轮三维参数化造型设计
3.
Reliability analysis of straight bevel gear transmission based on linear fatigue damage cumulative theory
基于线性疲劳累积损伤理论的直齿圆锥齿轮传动可靠度计算
4) Bevel gear
直齿圆锥齿轮
1.
Using computer numerical simulation based on the parameter design of Pro/Engineer and rigid plastic/rigid viscoplastic finite element method, the warm forging process of the bevel gear was analyzed.
通过基于Pro/Engineer的参数化设计和刚塑性/刚粘塑性有限元方法的计算机模拟,对直齿圆锥齿轮的温锻过程进行了分析,揭示了圆锥齿轮闭式锻造成形过程中的充形情况以及温度场和应力场、应变场,为齿轮温锻成形技术在工业生产中的应用提供有效参考。
2.
The object of this paper is to bring forward ideal profile modification curves to decrease the noise and vibration of bevel gear which is one of the accessories of differential.
本文研究的是富康轿车差速器上的直齿圆锥齿轮。
5) straight internal bevel gear
直齿内圆锥齿轮
1.
Imitating the process of practical gear machining,a 3D parameterized model of straight internal bevel gear is obtained by slotting from the back cone,which is helpful to NC machining and virtual assembly of the gear.
0为平台,利用其功能强大的表达式工具和三维建模模块,介绍了绘制锥齿轮大端齿槽曲线的方法,模仿齿轮的实际加工,在锥齿轮的背锥上去除齿槽,得到了直齿内圆锥齿轮的三维参数化模型,并对其参数化控制方法进行了简述,为后续直齿内圆锥齿轮的数控加工、虚拟装配等奠定基础。
6) straight bevel gear
圆锥直齿轮
1.
Machining straight bevel gear by gear-hobbing machine;
用滚齿机加工圆锥直齿轮
2.
In this paper, the problem of contour skim of hardened large module straight bevel gears is solved with carbide indexable contour gearshaping tool.
本文利用硬质合金可转位仿形刨刀,解决了大模数硬齿面圆锥直齿轮的仿形刮削加工问题。
补充资料：婞直
1.倔强;刚直。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条