1) ANSYS/ DYNA
ANSYS/DYNA程序
2) ANSYS/LS-DYNA finite element software
ANSYS/LS-DYNA有限元程序
1.
The text takes into account dynamic progressive collapse simulation analysis of 3-D Steel Frame Structures with ANSYS/LS-DYNA finite element software to research collapsing mechanisms of structures and design structures that have sufficien.
目前,结构体系在正常荷载作用下的设计已经成熟,但在偶然荷载作用下的抗倒塌能力还不够,而连续倒塌往往导致惨重的人员伤亡和巨大的经济损失,本文采用ANSYS/LS-DYNA有限元程序对空间钢框架结构进行连续倒塌动力响应仿真分析,以研究结构的倒塌机制,并进行抗连续倒塌设计。
3) Dyna program
Dyna程序
4) program ANSYS
ANSYS程序
1.
The burst of soft rock is studied by program ANSYS.
利用ANSYS程序分析了权台煤矿软岩冲击矿压。
5) ANSYS program
ANSYS程序
1.
An ANSYS program is inducted into a model at the bearing structure containing water-based ceramics sliding bearing,which is created with Proe,consequently a real-loading-like situation appears,in which an analysis of Finite Element will be carried out,which provides the backlash between ceramics shaft and ceramics sleeve.
用Proe建立水润滑陶瓷滑动轴承所在轴系结构的实体模型,导入ANSYS程序后,模拟实际加载情况进行有限元分析,得出并验证了陶瓷轴颈与陶瓷轴套之间的间隙应取在50～60μm之间,为该水润滑陶瓷滑动轴承的研究提供了关键数据,也为今后在轴承领域的研究提供了参考。
2.
In light of the importance of simulation analysis of massive concrete temperature field,this paper illustrates some concrete modus operandi to realize the simulation of temperature field by using ANSYS program, carries out simulation analysis of temperature field combined with massive concrete of 2# pier platform in Dahebian grand bridge,and draws some correlative conclusions.
针对大体积混凝土温度场仿真分析的重要性,阐述了用ANSYS程序实现对温度场仿真的一些具体做法,结合大河边特大桥2号墩承台大体积混凝土进行了温度场的仿真分析,得出了一些相关结论。
3.
After the analysis of SR power spectrum and the heat transfiguration based on ANSYS program, we design.
我们通过对同步光的功率谱分析和基于ANSYS程序的受热形变分析,设计出一面带水冷系统的铍镜用以反射可见光和透射X射线,以满足设计要求。
6) the ANSYS computer program
ANSYS程序
1.
Nonlinear finite element analysis of six SRC (steel reinforced concrete) beams using the ANSYS computer program were conducted and the mechanical behaviors of these beams were analyzed.
采用ANSYS程序对6个型钢混凝土梁试件的受力性能进行非线性有限元数值分析,对型钢混凝土结构数值模拟中混凝土和钢材材料模型定义、有限元建模、钢筋单元生成及后处理等关键技术进行系统研究。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条