1) Si-N-O film
Si-N-O薄膜
1.
Influence of Si-N-O films structure on their hemocompatibility
Si-N-O薄膜结构对薄膜血液相容性的影响
2) Ti-Si-N films
Ti-Si-N薄膜
1.
The influence of bombardment energy on the growth and mechanical property is investigated,and the influence of bombardment energy on the growth mechanism of Ti-Si-N films is discussed.
试验结果表明:当轰击能量为700eV时,Ti-Si-N薄膜晶粒直径达到了最小值11nm,此时Ti-Si-N薄膜的硬度相对最高,为33GPa。
3) Nb-Si-N films
Nb-Si-N薄膜
1.
The experimental results indicate that through controlling the SiH_4 partial pressure in the mixed gas,it is convenient to deposit Nb-Si-N films different in silicon contents by m.
结果表明,采用反应磁控溅射技术通过控制混合气体中SiH4分压可以方便地获得不同Si含量的Nb-Si-N薄膜。
4) Cr-Si-N coating
Cr-Si-N薄膜
1.
Cr-Si-N coatings by incorporating several atomic percentage of Si to CrN were prepared,using an arc ion plating method.
利用电弧离子镀方法,在(SCM415)钢基体上制备了Cr-Si-N薄膜。
5) Zr-Si-N films
Zr-Si-N薄膜
1.
Zr-Si-N films were prepared by radio frequency powered reactive magnetron sputtering at different N2 partial pressures.
03PaN2分压条件下,Zr-Si-N薄膜硬度达到22。
补充资料：SI
有机硅树脂简称SI，是由三乙氧基硅烷等缩合而成。溶于乙醇、丁醇、醋酸乙酯、丙酮、苯、甲苯、环己酮等。预聚体在低温下能快速固化，固化后的树脂硬度高、耐热、耐磨、耐辐射、耐水、防潮、耐大气老化，低温(-50℃)不脆化。透明度高，可见光透光率90％以上。无毒。
用作酚醛树脂和环氧树脂剂的改性剂，可提高耐热性和耐水性贮存于阴凉、通风、干燥的库房内。
用作酚醛树脂和环氧树脂剂的改性剂，可提高耐热性和耐水性贮存于阴凉、通风、干燥的库房内。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条