说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 正拉黏结强度
1)  tensile bond strength
正拉黏结强度
1.
Based on the experiments about the tensile bond strength of 243 observation points and the shear bond strength of 24 observation points,the bond performance between polymer mortar and concrete was analyzed and the influencing factors of bond strength were explored.
通过243个测点的正拉黏结强度试验和24个测点的剪切黏结强度试验,分析了聚合物砂浆与混凝土界面黏结性能,探讨了黏结强度的影响因素;结合试验数据提出了正拉黏结强度和剪切黏结强度的计算模型。
2)  micro-tensile bond strength
微拉伸黏结强度
1.
The influence of testing jigs on micro-tensile bond strength;
试样夹具对微拉伸黏结强度测定的影响
3)  Microtensile bond strength
微拉伸黏结强度
1.
Microtensile bond strength measurements were evaluated.
目的:比较2种不同类型的牙本质黏结系统对深层牙本质和浅层牙本质的微拉伸黏结强度的影响。
4)  bonding strength
黏结强度
1.
Research of shear bonding strength of fiber posts bonding with resin cements;
树脂黏结剂对纤维桩剪切黏结强度的研究
2.
Comparison of bonding strength in two different designs;
两种黏结设计黏结强度的比较
3.
Effects of immersing time on bonding strength of five kinds of cements;
浸泡时间对5种水门汀黏结强度的影响
5)  bond strength
黏结强度
1.
Influence of silver base inorgain antimicrobial on cytotoxicity and tensile bond strength of soft denture liner;
载银抗菌剂对软衬材料细胞毒性及黏结强度的影响
2.
Influence of silicon dioxide content to microtensile bond strength between experimental dual-cure resin composite luting cement and fiber post;
填料含量对实验双固化树脂水门汀与纤维桩黏结强度的影响
3.
Microtensile bond strength of three adhesive systems;
三种黏结材料黏结强度的比较
6)  positive pulling bond strength
正拉粘结强度
1.
It also study the positive pulling bond strength of carbon fiber sheets and concrete in freeze-thaw environment through the freeze-thaw cycle test of 20 carbon fiber sheets and concrete for 50 times,75 times,100 times,which is compared with test ones under normal temperature.
首先对碳纤维片的应用现状及前景进行了论述,然后通过20个碳纤维片材与混凝土的50次、75次、100次冻融循环试验,研究冻融循环条件下,碳纤维片材与混凝土之间的正拉粘结强度,并与常温下的试件进行对比。
补充资料:黏结强度
分子式:
CAS号:

性质:使胶接头中的胶黏剂与被粘物发生破坏所需的应力,即破坏粘接头必要的单位黏合面积或单位长度的力。一般用规定形状和尺寸的试片,在一定的温度、湿度、速度条件下测定。破坏形式有拉伸、拉伸剪切、压缩剪切、劈裂、剥离、冲击、弯曲等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条