说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 塑性抗弯承载力
1)  elastic moment resistance
塑性抗弯承载力
2)  plastic flexural theory
塑性抗弯承载力理论
3)  flexural capacity
抗弯承载力
1.
Calculation of flexural capacity for timber beams reinforced with CFRP sheets;
碳纤维布加固木梁正截面抗弯承载力的计算
2.
Calculation of flexural capacity for concrete beams reinforced with prestressed CFRP sheets;
预应力碳纤维布加固混凝土梁的抗弯承载力计算
3.
Research on calculation method of flexural capacity of the hybrid reinforced concrete beams;
混杂配筋混凝土梁抗弯承载力计算方法初探
4)  flexural strength
抗弯承载力
1.
Based on the different failure modes of RC members strengthened with high strength wire mesh and polymer mortar,a practical calculating method for flexural strength of RC members strengthened is put forward.
根据高强钢绞线网—聚合物砂浆抗弯加固的不同破坏模式,提出了钢绞线网—聚合物砂浆抗弯加固的抗弯承载力计算方法,并给出了工程实用的计算方法。
2.
This paper presents a calculation method of flexural strength about reinforced concrete(RC) beams strengthened with carbon fiber reinforced polymer laminate.
提出了一种关于碳纤维片材加固钢筋混凝土梁的抗弯承载力计算方法,其中碳纤维加固梁的应用前提和使用阶段加固梁的验算公式是对现行规范的一种补充和完善,并提出了有待进一步研究的问题。
3.
Formulas for calculating the flexural strength of the beams are developed.
采用数值分析方法对FRP约束混凝土纯弯构件的荷载 -变形关系进行全过程分析 ,理论计算结果与实验结果吻合良好 ,在此基础上 ,本文推导了FRP约束混凝土构件抗弯承载力简化计算公式 ,公式形式简单 ,概念明确 ,便于实际应用。
5)  bending strength
抗弯承载力
1.
Calculation suggestion about negative moment bending strength of the steel concrete composite beams;
钢-砼组合梁负弯矩区抗弯承载力的计算建议
2.
The experiment results show that the concrete core in the prestressed concrete pipe pile has huge influence on improving its bending strength and ductility.
普通预应力混凝土管桩在水平地震作用下抗弯能力较差;试验结果表明,设置填芯混凝土可以大幅度提高其抗弯承载力和延性性能;通过实验,推导出填芯混凝土抗裂弯矩和抗弯承载力的计算公式,可为工程计算和设计提供一些参考。
3.
The formula for calculating the shearing strength and bending strength of corroded reinforced concrete members are proposed.
通过对锈蚀钢筋混凝土构件的低周反复荷载试验,讨论了钢筋锈蚀对混凝土构件的滞回曲线、骨架曲线、刚度、延性、耗能能力、承载力等不利影响,提出了锈蚀钢筋混凝土构件抗剪承载力与抗弯承载力计算表达式。
6)  flexural bearing capacity
抗弯承载力
1.
Analysis on flexural bearing capacity of RC beams strengthened by prestressed CFRP;
预应力CFRP加固混凝土梁抗弯承载力分析
2.
Experiment on flexural bearing capacity of concrete beams with aggregate recycled;
再生混凝土梁抗弯承载力的试验
3.
Effect of concrete creep on flexural bearing capacity of concrete beams strengthened with CFRP laminates;
混凝土徐变对碳纤维片材加固混凝土梁抗弯承载力的影响
补充资料:塑性
分子式:
CAS号:

性质:又称塑性。材料受外力、热等作用变形后,能完全或部分保持其变形的性质。是材料的一种加工和使用性能。橡胶的可塑性通常用外力消除后仍保留的残余变形来表示,它是评价橡胶加工性能的重要指标。在橡胶加工过程中,由于橡胶具有弹性会给其加工过程带来困难,适当提高橡胶的可塑性有利于橡胶的加工操作。但可塑性过大,又会使橡胶制成品的物理机械性能下降,对加工操作也不利。通常在满足工艺加工要求的前提下,以具有最小可塑度为宜。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条