说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> "闭口型"钢承板组合楼板
1)  Closed steel plate for Combination of floor
"闭口型"钢承板组合楼板
2)  composite slabs with closed profiled steel sheeting
闭口型压型钢板-混凝土组合板
3)  re-entrant trough profiled steel sheeting-light weight concrete composite slAbs
闭口型压型钢板-轻骨料混凝土组合板
1.
Experimental study on mechanical behavior and vibration characteristic of re-entrant trough profiled steel sheeting-light weight concrete composite slAbs;
闭口型压型钢板-轻骨料混凝土组合板受力性能及动力特性试验研究
4)  closed profiled steel sheeting-light weight concrete composite slabs
闭口型压型钢板-轻骨料砼组合板
5)  profiled sheet-concrete composite floor
压型钢板组合楼盖
1.
Such technology as reinforcement of old structural components,treatments of joints for new and old components and application of profiled sheet-concrete composite floor etc.
本文介绍在进行某建筑的室内增设大跨度夹层设计时采用的原结构构件加固、新旧构件节点连接处理、压型钢板组合楼盖等技术。
6)  closed profiled steel sheeting
闭口型压型钢板
1.
A closed profiled steel sheeting can be used as the reinforcement work together with the concrete.
闭口型压型钢板—混凝土组合板中,压型钢板能更好地起到受拉钢筋的作用,比开口型压型钢板—混凝土组合板有更多性能优势和更好的应用前景。
2.
In order to understand the failure modes,bearing capacity and the stiffness as well as the de- formation of a new type of composite slabs called as closed profiled steel sheeting-light weight concrete com- posite slabs,which was composed of closed profiled steel sheeting named BONDECKII and l.
闭口型压型钢板-轻骨料混凝土组合板具有自重轻和施工方便等性能优势,在高层建筑中具有广泛应用前景。
补充资料:压型钢板
      薄钢板经冷压或冷轧成型的钢材。钢板采用有机涂层薄钢板(或称彩色钢板)、镀锌薄钢板、防腐薄钢板(含石棉沥青层)或其他薄钢板等。压型钢板具有单位重量轻、强度高、抗震性能好、施工快速、外形美观等优点,是良好的建筑材料和构件,主要用于围护结构、楼板,也可用于其他构筑物。根据不同使用功能要求,压型钢板可压成波形、双曲波形、肋形、 V形、加劲型等。屋面和墙面常用板厚为0.4~1.6毫米;用于承重楼板或筒仓时厚度达 2~3毫米或以上。波高一般为10~200毫米不等。当不加劲时,其高厚比宜控制在200以内。当采用通长屋面板,其坡度可采用2~5%,则挠度不超过l/300(l为计算跨长)。 目前在建筑中应用的部分波形见图。
  
  
  压型钢板因原板很薄,防腐涂料的质量直接影响使用寿命,为了适应加工和防锈要求,涂层钢板需按有关规定进行各项检验。一般情况下薄钢板也可根据使用要求,经压型后再涂防锈油漆,或采用不锈钢薄板原板。
  
  压型钢板用作工业厂房屋面板、墙板时,在一般无保温要求的情况下,每平方米用钢量约5~11公斤。有保温要求时,可用矿棉板、玻璃棉、泡沫塑料等作绝热材料。压型钢板与混凝土结合做成组合楼板,可省去木模板并可作为承重结构。同时为加强压型钢板与混凝土的结合力,宜在钢板上预焊栓钉或压制双向加劲肋。
  
  一些工业发达国家应用压型钢板相当广泛,不仅在工业与民用建筑中大量应用,并且推广到车辆、船舶,仪表箱的壁板和外壳及民用器具等。中国在武汉钢铁厂1.7米轧机工程、上海宝山钢铁总厂及深圳特区等工程的屋面和墙面中大量使用,效果良好。(见彩图)
  
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条