说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 橡胶螺杆挤出机
1)  fiber calender
橡胶螺杆挤出机
2)  cold feed screw extruder
冷喂料橡胶螺杆挤出机
1.
Introduced the scope, technical parameters and equipment standards of cold feed screw extruder and a horizontal cutting machine.
介绍了冷喂料橡胶螺杆挤出机和卧式裁断机的使用范围、技术参数、设备完好标准等。
3)  rubber extruder
橡胶挤出机
1.
Development of CAD Software for Parameterised Design of Rubber Extruder Screw Based on Microsoft Solution Framework (MSF);
应用微软解决方案框架(MSF)研究开发橡胶挤出机螺杆参数化设计的CAD软件系统
2.
The model could be used to analyze on multi-targets of multi-factors, and also be used to design or choice the type of rubber extruder on the purpose of finding the optimization parameters.
该模型可以进行多影响因素下的多目标分析,并应用于橡胶挤出机的结构选型、结构设计、找出最佳的工艺参数等。
3.
Presently in the special engineering field, the design of rubber extruder product is complicated, time-consuming, strongly empirical, heavily depend.
对于橡胶挤出机设备的设计这一专业领域,目前还处于设计元素选定理论依据少、依赖专家经验性强、单独的个性化个案设计多、设计周期长和烦琐的常规设计。
4)  screw extruder
螺杆挤出机
1.
Design of electric control system of screw extruder for tread wrapping production line;
胎面缠绕生产线螺杆挤出机电气控制系统的设计
2.
Thermal Entrance Effect in the Lubrication Clearance of a Screw Extruder;
螺杆挤出机润滑间隙内温度入口效应
3.
Study on optimizing design of screw extruders and it's application
螺杆挤出机优化设计的现状及发展
5)  extruder [eks'tru:də]
螺杆挤出机
1.
Ih this article, the author points out the necessity, methods and effects of technical reform on transmission system of the extruder with the frequency - varying controlling technics.
提出了用变频控制技术改造螺杆挤出机传动系统的必要性,改造方法和效果。
2.
The reclaiming mechanism and the technological process of extruder reclaiming process for producing reclaimed rubber were reviewed.
简介了螺杆挤出法生产再生胶的工艺原理、再生过程,以及由美国再生胶公司和沈阳化工学院开发的螺杆挤出机的结构特点和设计参数。
6)  Silicone rubber extruder
硅橡胶挤出机
补充资料:橡胶模具、橡胶压模、橡胶硫化模
分子式:
CAS号:

性质:又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得,并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同,型腔尺寸必须考虑不同橡胶的收缩率,在产品尺寸基础上进行放大或缩小,方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条