说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 冷藏血小板
1)  Refrigerated platelet
冷藏血小板
2)  cryopreserved platelet
冷冻血小板
1.
Survival rates at 4 hours after transfusion of fresh platelets and cryopreserved platelets in SCID mice were 79.
结果表明:冷冻血小板在活体内存活率明显降低,新鲜血小板和冷冻血小板输注SCID小鼠体内4小时时的存活率分别为(79。
3)  chestnut refrigerated storage
板栗冷藏
4)  hold-over plate refrigerated vehicle
冷板冷藏车
1.
Temperature distribution of tomatoes in hold-over plate refrigerated vehicle during transporting period;
番茄在冷板冷藏车运输过程中的温度分布
2.
Study of heat transfer performance of hold-over plate in hold-over plate refrigerated vehicle;
冷板冷藏车内冷板换热性能的研究
3.
The rising temperature of frozen cargoes will cause the growth and propagation of microorganism due to high heat load through the vehicles bodywork during the period of transporting frozen cargoes by hold-over plate refrigerated vehicles.
冷板冷藏车在运输冷冻货物过程中,车体传热负荷大,使车内冷冻货物温度有所升高,促使冷冻货物中微生物生长和繁殖。
5)  cool plate refrigerator car
冷板冷藏车
1.
With the 120 km/h mechanical cool plate refrigerator car as an example, through the structure optimization, sensitivity analysis and parameter optimization of the car-body steel structure, the analysis and calculation methods of lightening of the car-body load-carrying structure are provided.
以120km/h机械冷板冷藏车为例,通过对其车体钢结构进行结构优化、灵敏度分析和参数优化,提供了车体承载结构轻量化的分析计算方法。
2.
Described are the technical parameters, features, structure and key technology research on the new type cool plate refrigerator car.
介绍了新型冷板冷藏车的技术参数、特点、车辆构造及关键技术研究。
3.
The calculation method for the heat load of cool plate refrigerator car in operation is des-cribed, and the heat load in transport of the frozen and cooled goods is calculated with the actual example.
介绍了冷板冷藏车运行热负荷的计算方法 ,并对运输冷冻和冷却货物时的热负荷进行了实例计算 ,为减小冷板冷藏车运行热负荷、确保货物冷藏运输质量提供了理论依据。
6)  hold-over plate refrigerated vehicles
冷板冷藏车
1.
Influence of stack method on the temperature field of cargoes in hold-over plate refrigerated vehicles;
冷板冷藏车中货物堆码对其温度场的影响
2.
A large amount of cold was needed during charging period of hold-over plate refrigerated vehicles, but there is the phenomenon that the stored cold was not released completely during discharging period.
机械冷板冷藏车充冷需要大量冷量 ,而放冷过程中存在放冷不充分的现象 ,冷板内共晶溶液蓄存冷量不能充分利用 ,造成冷量浪费。
补充资料:冷冻
分子式:
CAS号:

性质:又称致冷或制冷。人工产生低温(低于周围环境温度)的技术。普通使用。的冷冻方法有压缩式和吸收式两种。它们共同的基本原理是利用液体蒸发和气体膨胀时吸取四周的热量的作用来产生低温。此外还有半导体冷冻技术的研究。冷冻范围一般是约在-100℃以内。冷冻是现代冷藏事业的基础,易腐物品借以长期保存和远途运输。冷冻可为工业生产和科学研究创造低温条件。冷冻也是改善在高温下人们的生活和劳动条件的措施。研究冷冻原理以及如何应用于生产和生活中去的技术和操作,称做冷冻工程、制冷工程或制冷工程(refrigerating engineering)。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条