1) Z250 resin compostite
Z250复合树脂
1.
One group was treated with Z350 nanofiller resin compostite, the other was treated with Z250 resin compostite.
方法:160颗需要进行修复的前牙随机分为两组,即实验组和对照组各80颗,分别采用Z350纳米复合树脂和Z250复合树脂修复,修复完成时及修复1年后进行患者和医生对修复体的美观满意率调查,并进行修复效果的成功率检查。
2) Filtek z250 composite resin
Filtek z250复合树脂
1.
Objective: This project adopts the dyeing method to compare the degree of the microleakage of premolar typeⅤhole filled by Ceramage polymerization porcelain inlay, Filtek z250 composite resin, Filtek z250 composite resin and Lonosit , Ceramage polymerization porcelain inlays and Lonosit, composite the filling materials effect and provide experimental data for clinical application.
目的:用Ceramage聚合瓷嵌体和Filtek z250复合树脂及Lonosit洞衬剂衬底后,修复离体前磨牙Ⅴ类洞,通过染料染色法,对比观察四种充填情况边缘微渗漏的程度,探讨Ceramage聚合瓷嵌体和Filtek z250复合树脂的充填效果,及Lonosit洞衬剂对边缘微渗漏的影响,为充填材料及洞衬剂的临床应用提供实验依据。
3) composite resin
复合树脂
1.
Research progress of the visible-light cured dental composite resin system;
可见光固化齿科复合树脂体系的研究进展
2.
The visible light cured dental composite resin;
齿科可见光固化复合树脂
3.
Clinical analysis of restoring vertical food impaction with composite resin inlay and directly resin filling;
复合树脂直接充填与树脂嵌体修复治疗垂直型食物嵌塞的临床分析
4) compound resin
复合树脂
1.
A research into polyester fiber reinforcing MH compound resin;
聚酯纤维增强MH复合树脂研究
2.
The covering compound resin is prepared by synthesizing the two different acrylic resins with two modified monomers and by using the noncompatibility of film formation of the two high polymers.
采用两种改性单体合成两种不同的丙烯酸树脂,利用两种高聚物成膜的不相容性,制备了一种具有遮盖性的复合树脂。
3.
When it was applied, the active groups of the two resins were cross - linked each anther at room temperature getting polyurethane - polyacryiate compound resin.
分别合成了带有端酰肼基的自乳化型聚氨酯乳液和带酮羰基侧链的聚丙烯酸酯乳液,将两种乳液混合复配成在室温下可长期稳定储存的乳液,应用时两种树脂的活性基团在室温发生交联反应得到聚氨酯交联的聚丙烯酸酯复合树脂。
5) composite
[英]['kɔmpəzɪt] [美][kəm'pɑzət]
复合树脂
1.
Study on modified ultrafine-diamond reinforcing and toughening bis-phenol A dental composites;
改性纳米金刚石增强增韧医用口腔复合树脂的研究
2.
Study on CC-2SH Adhesive Composite Used in Anterior Teeth;
CC—2SH粘结性前牙复合树脂研究
3.
The interfacial junction in the glass fiber reinforced composite;
玻璃纤维增强复合树脂结合界面的研究
6) composite resins
复合树脂
1.
Effect of composite resins with different temperature of second heating treatment on mechanical properties;
不同热处理温度对光固化复合树脂机械性能的影响
2.
An experimental study of light cured composite resins to dental pulp reaction;
光固化复合树脂对牙髓影响的实验研究
3.
Effects of curing technics on properties of composite resins containing whisker-particles compound
固化工艺对晶须熔附颗粒复合树脂性能的影响
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条