1) fire signal time history response
响应信号时程
1.
Calibrated parameters of the detection\'s Cleary time lag model and the analytical results from the FDS fire simulations were combined to develop a model to predict the fire signal time history response in the sensing chamber,which is applicable to ceiling jets with velocities of 0.
为预测点型感烟火灾探测器的响应信号时程,提出了采用FDS软件进行数值风洞实验、标定探测器Cleary迟滞模型参数的方法和步骤。
2) response signal
响应信号
1.
In light of the response signal of a magnetorheological(MR) fluid shock absorber,the pattern reasoning control method is used for the control of the MR fluid shock absorber of an automobile.
基于磁流变减振器的振动响应信号,将模式推理控制方法应用于汽车磁流变减振器的控制。
3) Signal response
信号响应
1.
The relationship between the failure mode and the signal response is studied.
采用超音速等离子喷涂设备制备了铁基自熔剂合金涂层,通过球盘式接触疲劳试验机考察了喷涂层的疲劳行为,使用扫描电子显微镜对涂层的截面和失效形貌进行了表征,研究了不同信号响应对涂层接触疲劳失效形式的指示作用。
2.
The experimental results show that the signal response is faster when the conductive length of probe tips is smaller.
实验结果表明,探针导通距离越小,信号响应越快,当导通距离小于0。
4) time-history response
时程响应
1.
Based on the static analysis,seismic time-history response behavior for the high rock slope to anti-seismic against M8 earthquake,with 0.
212 g的时程响应分析。
2.
A finite element model of a high-rise steel structure is built and time-history response of the model impacted by Tianjin seismic wave is analyzed.
采用的主要分析方法是有限元模型在天津波作用下的时程响应数值模拟,并对杆件应力、层间位移等重要控制变量进行对比分析。
5) time history response
时程响应
1.
,including its vibration mode,period,displacement,internal force and seismic time history response.
本文对超薄壁型轻钢结构多层住宅结构体系的分析研究,主要在一榀平面框架模型基础上,建立相应的质点动力计算简图和计算方法,同时着重分析了考虑蒙皮效应的超薄壁型轻钢结构在地震等动力荷载作用下的受力影响情况,包括结构振型、周期、位移、内力等动力特性及地震的时程响应行为,并与未考虑蒙皮效应的超薄壁型轻钢结构进行了对比分析研究,得出的有限元分析模型对以后的理论分析有一定的借鉴作用,并对工程实际应用提供较为可靠的理论依据。
6) primary response
预响应信号
1.
We emphasize how to create the primary response and how to guarantee its validity.
简要介绍了一种混合电路故障仿真技术,着重描述如何生成预响应信号,以及如何保证预响应信号的正确性。
补充资料：冲激响应
冲激响应
impulse response
下面介绍单位冲激函数与脉冲函数。脉冲函数P。(t)定义为，O
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条