2) transformation kinetics
转变动力学
1.
The effect of Nb on the deformation-enhanced ferrite transformation was studied, and the transformation kinetics was analyzed.
利用热模拟压缩变形实验研究了含铌钢和相应成分的低碳钢过冷奥氏体形变强化相变的组织演变规律,探讨了铌在析出状态时对形变强化相变的影响,进行了转变动力学曲线的分析。
2.
deformation temperature,strain rate and prior austenite grain size, on the microstructural evolution,transformation kinetics and the critical strain (ε_c) for the completion of DEFT were investigated during deformation of undercooled austenite in a low carbon steel.
研究了低碳钢过冷奥氏体变形时,工艺参数即变形温度、变形速率和原始奥氏体晶粒大小对形变强化相变组织演变、转变动力学及相变完成时临界应变量εc的影响。
3.
Therefore, the higher strain is needed to accomplish the transformation, and the overall transformation kinetics becomes slower in the higher carbon content steels.
结果表明,锰含量相同时,碳含量提高,低碳钢形变强化相变孕育期延长,完成相变所需总应变增加,转变动力学曲线整体向高应变方向移动。
3) rotor dynamics
转子动力学
1.
The characteristic analysis of rotor dynamics of large hydraulic generating uint;
大型水轮发电机组转子动力学特性分析
2.
Applications of Rotor Dynamics Analysis in High Pressure Centrifugal Compressors
转子动力学分析在高压离心式压缩机中的应用
3.
According to the rotor dynamics theory,the vortex mechanism and rule of the rotor are closely related to the collision and friction interaction.
根据转子动力学理论,转子的涡动机理及规律与碰摩作用密切相关,考虑下部钻柱与井壁之间是否发生碰摩作用,应用转子动力学理论建立了2个下部钻柱涡动分析模型,探讨了下部钻柱涡动机理及规律。
5) Rotordynamics
转子动力学
1.
This thesis is a part of Research on Mechanism of Fluid-structure Interaction in a Whirling Centrifugal Impeller and Rotordynamics of Turbo Machine (ZS031-B25-009-G) supported by the Nature Science Fund of GanSu Province.
本文的研究是甘肃省自然科学基金项目“叶轮内部流场流固耦合机理及转子动力学特性研究”(ZS031-B25-009-G)的部分内容。
6) transformation dynamics
转变动力学
1.
The influences of processing parameters and the purity of materials on transformation dynamics were evaluated.
利用热模拟单向压缩实验，分析了Ｑ２３５碳素钢应变强化相变过程中应变对铁素体晶粒数目及铁素体长大速度的影响，同时考察了铁素体转变动力学与应变速率、形变温度、奥氏体晶粒尺寸、纯净度的关系，并与无应变时进行比较。
补充资料：转动
机械运动的一种形式。有定轴转动和定点转动。前者指物体绕一固定轴转动，除转动轴上各点外，物体上其他点都绕轴作圆周运动。如门、窗的启闭；后者指物体绕一固定点的转动。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条