1) PMMA bone cement
PMMA骨水泥
1.
The clinical applications of various materials,including stainless steel,Co alloy,pure titanium and Ti alloy,alumina ceramic,ultra-high molecular weight polyethylene(UHMWPE),PMMA bone cement,and hydroxyapatite coated material,are stated.
对各种植入物材料,包括不锈钢、钴基合金、纯钛和钛合金、氧化铝陶瓷、超高分子量聚乙烯和PMMA骨水泥等高分子材料以及羟基磷灰石涂层复合材料的临床应用现状等做了阐述。
2) acrylic bone cement (PMMA)
骨水泥(PMMA)
3) bone cement
骨水泥
1.
Effects of setting liquid on the strength of α-calcium phosphate-tetracalcium phosphate bone cement;
固化液对α-磷酸钙-磷酸四钙骨水泥强度的影响
2.
Preparation and property of calcium phosphate bone cement containing PVA;
PVA复合磷酸钙骨水泥的制备和性能研究
3.
Effects of bone cement on the hemodynamics of geriatric patients;
骨水泥对老年人血流动力学的影响
4) cement
[英][sɪ'ment] [美][sə'mɛnt]
骨水泥
1.
Porosity study of the carbonated hydroxyapatite cement;
碳酸化羟基磷灰石骨水泥的开发与多孔化研究
2.
Impaction bone grafting in THA revision with freeze-dried allograft and anatomic cemented femoral stem;
应用解剖型骨水泥股骨假体结合冻干骨打压植骨进行髋关节翻修
3.
Comparative Study on Curative Effect and Possible Survivorship between Cemented and Cementless Total Hip Replacement;
人工全髋置换骨水泥和无骨水泥假体术后疗效及假臼可能生存率比较
5) polymethylmethacrylate
[,pɔlimeθilme'θækrəleit]
骨水泥
1.
Percutaneous Polymethylmethacrylate vertebroplasty in the treatment of osteolytic vertebrael metastatic carcinoma.;
经皮注射骨水泥椎体成形术在脊柱骨转移癌治疗中的应用
2.
Objective To evaluate the effect of pressure load of avascular necrosis of the femoral head(ANFH) by percutaneous injection of polymethylmethacrylate(PMMA).
目的探讨经皮穿刺骨水泥注射对缺血坏死股骨头压力负荷的影响。
3.
Objective To design a new reusable screw compression device for injection of polymethylmethacrylate(PMMA) with standard single use plastic push-plunger syringe and evaluate its usage during percutaneous vertebroplasty.
目的 设计可重复使用的骨水泥注射装置并评价其临床应用价值。
6) Cementless
非骨水泥
1.
Total Hip Arthroplasties with Tapered Titanium-alloy Cementless Femoral Components;
锥形钛合金非骨水泥股骨柄全髋关节置换术34例随访一年X线结果分析
2.
Analysis of clinical effect using Zweymüller cementless hip prosthesis for hip joint disease;
Zweymüller非骨水泥型髋关节假体治疗髋关节疾病疗效分析
3.
Research on early inpatient rehabilitation after cementless total hip arthroplasty;
非骨水泥型全髋关节置换术患者的早期康复
补充资料：PMMA
聚甲基丙烯酸甲酯是由甲基丙烯酸甲酯单体聚合而成。平均分子量50-l00万。根据聚合机理的不同，PMMA有四种不同的构型：无规立构、全同立构、间同立构、立构规整，性能也有所不同。高度透明的无定形热塑性聚合物，相对密度(30 ℃／4℃)1.188-1．22。高度通明性，透光率90％-92％，比无机玻璃还高，并能透过紫外线光达73．5％。折射率1. 49。机械强度高、韧性好，拉伸强度60一75MPa，冲击强度12-13kJ／m2，比无机玻璃高8-10倍。可拉伸定向，冲击强度提高1.5倍。具有优良的耐紫外线和大气老化性。玻璃化温度80-100 ℃，分解温度＞200 ℃。使用温度-40～80℃。耐碱、耐稀酸、耐水溶性无机盐、烷烃和油脂。溶于二氯乙烷、氯仿、丙酮、冰醋酸、二氧六环、四氢呋喃、醋酸乙酯、甲苯等，不溶甲苯、乙醇、乙醚、石油醚等。电绝缘性良好。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条