1) spot welding electrode pole
点焊机用电极
2) spot-welding tip
点焊机电极
3) spot-welding electrode
点焊电极
1.
Optimization of process parameters of vibration electrospark deposition TiC on spot-welding electrode;
点焊电极表面电火花振动熔敷TiC工艺参数优化
2.
Functional TiC coating was deposited on the surface of Cr-Zr-Cu spot-welding electrode by vibrating electrospark deposition.
为了提高镀锌钢板点焊电极的寿命,以TiC为沉积材料,在铬锆铜球型点焊电极表面进行了电火花振动沉积功能涂层的工艺试验,研究了首次单点沉积、限时沉积、清洗前处理、扩散后处理等方法获得功能层的显微组织与性能。
3.
In order to improve the life of spot-welding electrode for zinc-coated steel,electrospark deposition(ESD) processes were studied taking TiC as fusing material and CrZrCu as spot-welding electrode.
为了改善镀锌钢板点焊电极的寿命,选用铬锆铜球型点焊电极,以TiC作为熔敷材料,进行了点焊电极表面电火花沉积TiC工艺试验。
4) spot welding electrode
点焊电极
1.
Both sides electric currents,the voltage and the dynamic resistance were tested on continual spot welding process,the track test results under the different spot welding electrode active status were contrasted and analyzed,the best method of online detection of spot welding electrode active status was determined.
对连续点焊过程中电极两端电流、电压和动态电阻进行跟踪测试,并对点焊电极不同工作状态下跟踪测试结果进行对比分析,确定出在线监测点焊电极工作状态的最佳方法。
5) multiple-electrode spot welding machine
多极点焊机
6) spot and butt welding machine
点焊对焊两用机
补充资料：点焊
点焊
spot welding
d ionhon点焊(sPotwelding)利用工件电阻所产生的热在接触面上使母材熔化，并形成焊点的电阻焊方法。它是将焊件装配成搭接接头，并压紧在两电极之间，于低电压下通以大电流来进行的。 点焊的焊接速度快，在薄板组件的大批量生产中适于自动化。它可以与其他制造工序一起编入组装线中。对操作技术要求低，在采用半自动机器单件加工中是经济的。但设备成本较高、维修难度大。搭接接头增加了产品的重量和成本，而且搭接形式载荷是偏心的，因而不能利用板材的全部强度。 点焊常用于两块成分和厚度相同的金属薄板，也适用于两块以上成分厚度各异的金属连接。 ‘(卓忠玉)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条