1) outer insert method
线性外插
1.
The pull\'s calculation model is established with the remnant power by using the linear outer insert method.
通过分析直升机动力学特点,运用动量法和叶素理论,将直升机旋翼功率进行拆分求解,推导出一套旋翼需用功率及可用功率的简化计算方法;根据线性外插法,用剩余功率建立拉力计算模型,对旋翼拉力进行估算。
2) linear extrapolation
线性外插法
3) linear interpolation
线性插补
1.
Meanings of linear interpolation and velocity;
多轴联动线性插补及其速度的理解
2.
This article analyzed the theoretical errors resulted from approximating the perfect continuous tool path with linear interpolation in 5-axis machining,and this kind of error is also called non-linear motion errors or known as the geometry-based errors.
分析了五坐标联动数控系统采用线性五轴插补运动时,与实际的空间非线性连续轨迹之间的理论加工误差;用空间解析几何、齐次坐标变换建立了双转台结构五坐标机床的运动变换数学模型,并结合五坐标数控机床加工过程的线性插补原理,建立了该类五坐标机床的非线性运动误差估计模型,提出了一种非线性误差控制策略。
3.
To overcome this problem and optimize machining speed,based on the data sampling method,the 5-axis simultaneous linear interpolation was realized by using the equivalent displacement and the directional coefficient of the coordinate axis.
基于数据采样法,利用当量位移和坐标轴方向系数实现了5轴联动线性插补;利用直线加减速原理进行插补前加减速控制;对速度前瞻控制方法进行了深入探讨,实现了相邻程序段转接处速度优化、连续微小程序段速度计算、减速点提前预测及前瞻程序段数动态选择等。
4) linear interpolation
线性内插
1.
In view of some drawbacks in gray associative analysis method, this paper presents a linear interpolation method, which considerably improves the resolution.
针对当前灰关联评价法的不足 ,采用线性内插的方法进行了改进 ,提高了分辨率 ,在此基础上 ,以马颊河为例 ,对其 1 986～1 998年间的水环境监测数据进行了评价 ,得到了较为可靠且可比的结果。
2.
The paper investigate a structure of the digital down-converter(DDC) and put forward a design of numerical controlled oscillator with method of tabulation view and fraction ratio decimation filter with mixing linear interpolation algorithm and CIC filter,so that the DDC process could be implemented in software on general purpose DSP chip and afford greater flexibility.
论述了数字下变频器的结构,探讨了采用查表方法实现数字控制振荡器,利用线性内插方法结合级联积分梳妆滤波器实现分数比抽取滤波,从而达到降低数字下变频器复杂性的目的,使得数字下变频处理可以在通用数字信号处理芯片中用软件实现。
3.
In the context, qualified visual three-dimensional ICT pictures are achieved through multi-piece two-dimensional images accumulation by, combining with thresholding method and linear interpolation.
工业CT图像三维重建是近年来工业CT技术研究的热点之一,将二维断层图像数据直接堆垒起来,结合阈值分割、线性内插等方法,获得了直观性较好的三维工业CT图像。
6) linear interpolation
线性插值
1.
N-dimensional linear interpolation method and its application in 3D temperature field calculation;
高维线性插值方法及其在3维温度场计算中的应用
2.
Two dimensional linear interpolation method and its application in calculation of planar temperature field;
二维线性插值方法及其在平面温度场计算中的应用
3.
Improved absorbing boundary condition based on linear interpolation for ADI-FDTD method
适用于ADI-FDTD的基于线性插值的吸收边界条件及其改进方法(英文)
补充资料：线性插值法
线性插值法是根据已知两项有关的对应关系资料估算第三项对应的未知资料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条