说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高温裂纹敏感性
1)  high- temperature cracking susceptibility
高温裂纹敏感性
2)  cracking susceptibility
裂纹敏感性
1.
Current EBW experiments on IC10 guide blade which is being researched in China have shown that the EBW has an obvious cracking susceptibility.
本文介绍了该合金的真空钎焊、TLP扩散焊的研究进展情况,重点分析了我国目前在研的IC10合金导向叶片产生明显电子束焊接裂纹敏感性的原因,并指出了改善电子束焊接工艺参数、填丝合金化和焊后热处理等解决方案。
2.
These help to improve the hot ductility and to alleviate the cracking susceptibility of the slab.
s-1的冷却速度,使铸坯在出结晶器后表面温度下降到A3温度以下,得到的表层组织均匀,晶界无膜状先共析铁素体,微合金元素析出物在晶内分布均匀,有利于提高铸坯热塑性及降低裂纹敏感性。
3)  crack sensitivity
裂纹敏感性
1.
The influences of nickel-based alloys spraying layer on the weld crack sensitivity were studied through simulating actual welding experiment in this paper.
通过模拟实际焊接试验 ,研究了镍基合金喷焊层对焊接裂纹敏感性的影响。
2.
The effects of structure character on the crack sensitivity were analyzed.
 利用火焰喷焊技术制备了镍基合金喷焊层,采用光学显微镜和扫描电镜研究了其组织特征,初步分析了该组织特征对喷焊层焊接裂纹敏感性的影响。
4)  cracking susceptibility
开裂敏感性,裂纹敏感性
5)  hot cracking susceptibility
热裂纹敏感性
1.
The influence of Lanthanum, Cerium, Yttrium, Praseodymium and Neodymium on weld hot cracking susceptibility of the pure nickel electrode used for cold welding of cast iron was studied.
研究了纯镍铸铁焊条冷焊时,稀土金属镧、铈、镨、钇及钕对焊缝热裂纹敏感性的影响规律,并分析了铈对焊接接头力学性能和加工性能的影响。
6)  reheat cracking susceptibility
再热裂纹敏感性
1.
By the same experimental condition,the results show that they have same low cold cracking susceptibility and certain extent reheat cracking susceptibility.
在同等条件下,对这两种钢的焊接冷裂纹和再热裂纹敏感性进行试验,结果表明:其冷裂纹敏感性均较低,但具有一定的再热裂纹敏感性,且前者的再热裂纹敏感性比后者稍低。
补充资料:高温
较高的温度,在不同的情况下所指的具体数值不同,例如在某些技术上指几千摄氏度以上,在工作场所指32摄氏度以上。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条