说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> Brushlet复特征
1)  Brushlet complex feature
Brushlet复特征
1.
Using the Brushlet complex feature of energy and phase as the input of RBF network, experiments on SAR image classification show that this method outperforms the traditional methods.
实验表明,基于Brushlet复特征和RBF网络的方法能够获得较高的分类率,性能优于传统方法。
2)  compound characteristics
复合特征
1.
Design and implementation of P2P traffic identification system based on compound characteristics;
基于复合特征的P2P业务识别系统的研究与实现
3)  complex eigenvalue
复特征值
1.
Calculation of complex eigenvalue of asymmetric matrix in analysis of vibration;
振动分析中非对称矩阵复特征值计算
2.
Based upon this, the applicability of two popular expressions about complex eigenvalues was investigated.
然后分析了复特征值的两类表达式的适用性,着重讨论了通过一元二次方程研究特征值性质的现行处理方法存在的困难。
3.
The complex eigenvalue method was applied to analyze the damping of sandwich composite structures taking into account the constitutive relation of viscoelastic material.
从粘弹性材料的本构关系出发,应用复特征值理论推导了夹芯复合材料结构阻尼的计算方法;同时基于能量损耗原理和阻尼的产生机理,研究了夹芯复合材料结构阻尼计算的模态应变能方法;提出了两种承载/减振夹芯复合材料结构模型,应用动态力学热分析方法测量了芯材的阻尼参数;应用两种阻尼计算理论和有限元数值分析相结合的方法研究了两种夹芯结构模型的损耗因子,并与试验结果进行了比较;分析了夹芯厚度对结构损耗因子的影响。
4)  complex eigenvalues
复特征值
1.
Instead of the conventional probabilistic statistical methods dealing with uncertain problems, interval mathematics and convex models are used to study, the problem on regions containing complex eigenvalues for non-proportional damping structures with uncertain but bounded parameters.
代替传统的处理不确定问题的概率统计方法 ,将利用区间数学和凸模型理论研究具有有界不确定参数的非比例阻尼结构复特征值所在区域问题 。
5)  Feature enhancing
特征修复
6)  complex feature
复杂特征
1.
This paper,adopts the complex feature theories and,makes a tentative research on the diversity of verbal suffixes in Uyghur language.
本文以复杂特征理论为指导思想,对维吾尔语动词附加语素的多样性进行了初步的研究。
2.
The parser is first trained purely on part of speech information, and then is integrated with related complex features to solve the structure ambiguity.
文中设计了一种包含复杂特征的统计句法分析模型,在单纯依靠词性信息的基于概率评价的句法分析模型的基础上,对只依靠词性信息难以消除歧义的规则,适当引入复杂特征集。
补充资料:BR
    顺丁橡胶是1,3-丁二烯采用定向溶液聚合方法得到的高顺式1,4结构含量的聚丁二烯,称为聚丁二烯橡胶,是有规立构橡胶,简称 BR, 高分子量的顺丁橡胶分子量为(80-120)×104;中高分子量的顺丁橡胶分子量为(25-40)×104。分子量分布较窄。玻璃化温度TG=-110 ℃。具有弹性高、低温性能好、耐磨性优异、耐曲挠性良好等特点。顺丁橡胶的缺点是拉伸强度、撕裂强度较低,抗湿滑性差,冷流性大,加工性能稍差。溶解度参数δ=8.3-8.6。溶于环己烷、正庚烷、正己烷、苯、甲苯等。
拉伸强度约13~14Mpa,扯断伸长率约为450%。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条