说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 撕裂方向
1)  tear orientation
撕裂方向
2)  longitudinal tear
纵向撕裂
1.
The longitudinal tear accident of transportation belt happens occasionally in transportation coal system of the power plants, once the tear accident happened, the transportation belt which values hundreds of thousands even millions $ will destroy within several minutes, and causes enormous economic loss.
在火电厂输煤系统中,输煤皮带纵向撕裂事故时有发生,价值数十万元甚至上百万元的输煤皮带,一旦发生撕裂事故,在几分钟内就会全部毁坏,造成巨大的经济损失。
2.
Through advance prevention principle of longitudinal tear,and two torn situation at loading point compression of materials,and foreign body penetrating tearing,it designs sensor devices to prevent loading and tearing pressure penetrating with irregular body.
通过对超前预防输送带纵向撕裂原理进行分析,对于在装载点处易发的物料卡压撕裂和异物穿透撕裂2种撕裂情况,设计出可预防装载点卡压撕裂和异物穿透撕裂的传感装置,该装置利用装载漏斗或溜槽上添加的活页板配合行程开关和压力传感器,判断装载点是否有物料卡压,利用整体缓冲托辊架配合压力传感器,判断装载点是否有异物穿透输送带。
3)  longitudinal rip
纵向撕裂
1.
Research on monitoring system for longitudinal rip of steel-cord belt;
钢绳芯输送带纵向撕裂监测系统
2.
The longitudinal ripping mechanism of belt converyor was investigated, a new method was raised and a new design decision of practical equipment was developed to monitor the longitudinal ripping of belt converyor by structural innovation of roller carrier and idler.
分析了带式输送机纵向撕裂机理,提出一种新的防止输送带纵向撕裂的方法,并给出相应实用装置设计方案。
3.
The longitudinal ripping mechanism of steel cord belt was investigated, and the bearing force of assuasive idlers at loading place of trail was analyzed during the belt to be ripped.
分析了矿用钢绳芯输送带纵向撕裂的机理 ,以及撕带时带式输送机落料口处缓冲托辊的受力情况 ,提出了一种新的输送带纵向撕裂监测和报警方法 ,并研制出一套新型的用于钢绳芯输送带纵向撕裂监测的实用系统 ,该系统采用应变式力传感器拾取输送带撕带时所受的附加压力 ,并以所测信号在一定时间内的积分是否超标作为撕带与否的判据 ,具有可靠性高、实时性好、抗干扰能力强和通用性好、安装方便等优点 。
4)  tear pattern
撕裂方式
5)  Tearing Mode Equations
撕裂模方程
6)  longitudinal tear strength
纵向撕裂强度
1.
R and high frost - line in order to make the films have proper longitudinal tear strength ( MD) and horizontal tear strength (TD).
试验发现:为保证合适的薄膜纵向撕裂强度和横向撕裂强度,应在高牵引速度、大吹胀比和高起霜线的条件下进行该树脂的加工。
补充资料:撕裂
分子式:
CAS号:

性质:用两个相反的力拉材料,使之分离或破裂。一般对薄膜材料和薄片材料关心这一指标,为了便于检验,一些试验方法都规定了专门的试样并预先开出了裂口。例如适用于塑料软片的埃莱门多夫法,就是将矩形或恒定半径的带圆弧试样开一切口,然后在专门的撕裂仪上用摆锤击打使其撕裂,读出度盘读数,算得耐撕裂力,单位N。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条