说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 不等厚磁极
1)  unequal thickness poles
不等厚磁极
1.
Furthermore,the effects of unequal thickness poles on reducing the airgap magnetic field distortion and improving the commutation condition were analyzed.
为了研究不等厚磁极结构对永磁直流电动机电枢反应和性能的影响,通过建立瞬态电磁场模型,利用时步有限元法对气隙磁场进行了计算。
2)  different thickness
不等厚
1.
CO_2 laser welding of tailored 5A02 aluminum alloy sheets with different thickness using filler powder;
铝合金5A02不等厚板的CO_2激光填粉拼焊
2.
Cupping test and simulation for laser tailor welded blanks with different thickness
不等厚激光拼焊板杯突试验及模拟
3.
CO2 Laser welding of 5A02 and 5A06 aluminum alloys sheet with different thickness is performed with or without the addition of filler metal powder.
采用CO2激光器,在填加和不填加合金粉末两种条件下,进行了不等厚铝合金(5A02,5A06)薄板的激光拼焊,研究了影响焊接过程稳定性和焊缝成形性能的主要因素,并用有限元方法(FEA)对焊接过程的温度场和应力场进行数值模拟,分析了拼焊板的残余应力分布和变形特点。
3)  spherical vessels
不等厚度
1.
On the basis of practical loadsupporting condition of large scale spherical vessels for water or oil storage,the integral hydorbulge forming technology of nonuniform thickness spherical vessels and a new method for measuring strain on inner surface of spherical vessels are discussed in this paper,and they are proved to be successful by means of experiment study.
本文根据大型储水、油球罐的实际受力情况提出了不等厚度球罐的整体无模成形工艺,并通过实验获得了成功。
4)  Annulus with unequal thickness
不等厚环
5)  variable thickness archdam
不等厚拱
6)  plates of unequal thickness
不等厚板
1.
The fatigue life of different welding shapes between plates of unequal thickness in pressure vessel was investigated from the point of local stress concentration at welding position.
从焊接部位局部应力集中的角度分析了不等厚板在不同焊接形式下的疲劳寿命。
补充资料:Harnack不等式(对偶Harnack不等式)


Harnack不等式(对偶Harnack不等式)
quality (dual Hatnack inequality) Harnack in-

【补注】一直到G的边界的H助nack不等式,见【AZI.l翻..‘不等式(对停H山丸朗k不等不)[ Har.改沁-勺函勺(d切红Hat’I犯‘k如为uaJ卿);rap.姗二p魄HcT助(月加湘oe)] 给出正调和函数的两个值之比u(x)/“(y)的上界和下界估计的一个不等式,由A.Hai,剐火(汇IJ)得到.令u)0是n维E议当d空间的区域G中的一个调和函数;令E。(y)是中心在点y处半径为;的球{x:}x一y!<;}.若闭包万了刃.CG,则对于所有的、“凡(,),o0是常数,亡“(省:,…,氛)是任一。维实向量,叉‘G.不等式(2)中的常数M仅依赖于又,A,算子L的低阶项系数的某些范数以及G的边界与g的边界之间的距离. fy,1, …粤馨 对于形如u:+Lu“0的一致抛物型方程(算子L的系数可以依赖于t)的非负解:(x,t),类似于1压ar-恤比不等式的不等式也成立.在此情形下,对于顶点在点(y,动处开口向下的抛物面(图a) {(x,t川x一,I’<。,(T一t),:一v,簇t簇:}的内部的点(x,t),只能有单边的不等式(fs」): u(x,r)(M妇(y,T),这里,M依赖于y,T,又,A,料,,,算子L的低阶项系数的某些范数,以及抛物面的边界与在其中“(义,t))0的区域的边界之间的距离.例如,如果在柱形区域 Q二Gx(a,b],中“〕O,此外,歹CG,并且如果刁G与刁g之间的距离不小于d(>0),而d充分小,那么在gx(a一矛,bJ中不等式 。(、.t、___/,、一。1,.:一:.八 1。,二之二止,二止匕成几11止二一一丈‘.+一+11 u气y,T)\下一I“/成立(协J).特别地,如果在Q中u)0(图b),且如果对于位于Q中的紧集Q,和QZ有 占“们山n(t一:)>0, (义,t)‘Q- (y.下)〔QZ那么有 n知Lxu(x,t)簇M nunu(x,t), (x,‘)‘QZ(x,‘)‘Q-其中M“M(占,Q,QI,QZ,L).函数 ·、·,‘卜exn(‘睿,、‘一暮“:)—对于任意的k,,…,气,它是热方程u,一△拟“0的解—表明在抛物型情形下双边估计的不可能性,
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条