1) defoam structure
消泡结构
2) bubble-break component
消泡构件
3) Micro-bubbles structure
微泡结构
4) foam structure
泡沫结构
1.
The effect of sparkling technology on polyimide foam structure;
发泡工艺条件对聚酰亚胺泡沫结构的影响
2.
Study on the formation of the foam structure of whipped topping;
植脂奶油泡沫结构形成的研究
3.
Three types of gravitational interaction and metgalaxy foam structure;
引力相互作用的三个类型与总星系的泡沫结构
5) cellular structure
泡孔结构
1.
As a result,the density of foams,and dosage of vinyl silicone oil,and cellular structure and testing condition had different important effects on compression stress-strain performance of silicone rubber-foams.
结果表明:硅泡沫的密度、乙烯基硅油用量、泡孔结构和测试条件分别对硅泡沫材料的压缩应力松弛率都有明显的影响,但影响程度有所不同。
2.
The cellular structure and surface appearance of PES-MPUE were improved when GPOPs were used.
实验结果表明,这种方法可以有效地改善聚酯型微孔聚氨酯弹性体的泡孔结构、表面性能,提高材料的硬度、强度等物理力学性能。
3.
The model-pressing foaming technologies for HTV silicone rubber-foams were introduced,by which the silicone rubber-foams with different cellular structures were prepared.
介绍了多种适用于热硫化硅橡胶泡沫的模压发泡成型技术,并分别采用该技术制备了具有不同泡孔结构的硅橡胶泡沫,探讨了成型技术对硅橡胶泡沫开孔率的影响。
6) bubble structure
泡孔结构
1.
PVC foaming material was modified by NBR(nitrile rubber) and made by the compression molding of one-step chemical foaming, and effects of assistants content on property and bubble structure of foaming material were investigated in the paper.
讨论了主要助剂用量对发泡材料性能和泡孔结构的影响。
补充资料：消泡
分子式：
CAS号：
性质：在发酵过程中由于通气搅拌会产生泡沫，当培养基黏稠或含丰富蛋白质时，泡沫稳定不易破碎而形成大量泡沫，影响发酵正常进行。此时需采取一定措施打碎已形成的泡沫或降低泡沫层厚度，这种作用叫做消泡。消泡的方法有机械消泡，如装消沫桨或用超声波等外力打碎泡沫；也有用表面活性剂促进泡沫破碎。
CAS号：
性质：在发酵过程中由于通气搅拌会产生泡沫，当培养基黏稠或含丰富蛋白质时，泡沫稳定不易破碎而形成大量泡沫，影响发酵正常进行。此时需采取一定措施打碎已形成的泡沫或降低泡沫层厚度，这种作用叫做消泡。消泡的方法有机械消泡，如装消沫桨或用超声波等外力打碎泡沫；也有用表面活性剂促进泡沫破碎。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条