1) bonding properties of surface
表面胶合强度
2) surface bonding strength
表面结合强度
1.
This paper analysed the influence of specimen thickness on test results of surface bonding strength of thin MDF.
分析比较薄型中密度纤维板试件在检测时组合厚度的改变对其表面结合强度测试结果的影响。
2.
The influence of changing the milled groove depth on testing results of the surface bonding strengthof MDF was analysed through experiment.
通过试验分析比较铣槽深度的改变对中密度纤维板表面结合强度测试结果的影响。
3) surface strength
表面强度
1.
On the methods to increase the surface strength of finished paper;
提高成纸表面强度途径的探讨
2.
Effects of wetting rate on soil surface strength and aggregate stability;
湿润速度对土壤表面强度和土壤团聚体结构的影响
3.
The effect of fiber composition and beating process on surface strength of off-set printing paper;
纤维配比和打浆工艺对双胶纸表面强度的影响
4) surface bonding
表面胶合
1.
The results showed that enzyme concentration and pretreatment duration had a significant effect on the surface bonding strength of wheat straw.
结果表明:在试验区间内,随着纤维素酶和半纤维素酶用量的增加,麦秸的表面胶合强度逐渐上升,UF树脂对麦秸表面接触角逐渐减小;酶处理时间的延长,有利于麦秸表面胶合强度的提高。
5) bonding strength
胶合强度
1.
Formation process of bonding strength during wood gluing operation;
木材胶接时胶合强度的形成过程
2.
5 %,the PF adhesive with moderate viscosity had high bonding strength,and the bonding strength could achieve the demands of GB/T 9846-2004.
实验结果表明,竹焦油替代量对所合成的酚醛树脂胶黏度和胶合强度特性影响较大,当竹焦油添加量为30 g,即替代量达到12。
3.
The influence of different electro-conductive elements and adhesive spread on shielding and bonding strength of Larix plywood was investigated.
以镍粉、石墨粉、不锈钢纤维和铜纤维作为导电单元,脲醛树脂为胶黏剂,制备3层落叶松胶合板,研究不同导电单元和涂胶量对板材电磁屏蔽效能(ESE)及胶合强度的影响。
6) bond strength
胶合强度
1.
The study on bond durability of structural plywood for timber structures mainly consists in determination of bond strength and heat durability of plywood.
木结构用胶合板胶合耐久性的研究,主要是对胶合强度和热耐久性的测定。
2.
The tea waste powder with different sizes as an additive was used to urea-formaldehyde (UF) resin, and the effects of the tea waste powder sizes and amount on the free formaldehyde content of UF resin, the formaldehyde emission, and bond strength of UF resin bonded plywood were studied in this paper.
将不同颗粒度的茶叶废料粉添加到脲醛树脂胶中,研究了茶叶废料的颗粒度、加入量等对脲醛树脂胶黏剂的游离甲醛含量、黏接胶合板的甲醛释放量及胶合强度的影响。
3.
The urea and two active compounds were concentrated to prepare ULR resin,and the ULR resin as an adhesive for plywood was studied by manufacturing plywood,testing its bond strength,and measuring its formaldehyde emission.
结果表明:一定反应条件下,反应时间对ULR树脂的粘度影响不大;面粉添加量对ULR树脂胶接胶合板的胶合强度影响较大;当反应时间为120min、面粉添加量为15%时,ULR树脂胶接胶合板的胶合强度能够满足国家标准(≥0。
补充资料：表面
表面
指人体或器官的外面或空腔的内面。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条