1) process calibration
工艺偏差校准
1.
This paper reports on the design and realization of a temperature compensation and process calibration 60MHz on-chip CMOS clock oscillator in SMIC 0.
18μm1P6M的标准CMOS工艺,设计并实现了一种带温度补偿和工艺偏差校准的60MHz片上CMOS时钟振荡器。
2) process variations
工艺偏差
1.
However,complex nano-technology such as sub-wavelength lithography and chemical-mechanical polishing will cause more and more large process variations and therefore seriously deteriorate the yield.
这主要是由于严重的工艺偏差将造成芯片中的关键路径时延呈现显著的非高斯随机分布,从而造成芯片的时序失败概率快速上升。
3) on chip variation
片上工艺偏差
1.
When IC design goes into the Deep Sub-micrometer era,timing signoff uncertainty due to on chip variation becomes more and more important.
当芯片设计进入深亚微米,片上工艺偏差(OCV)造成的时序不确定性,成为超大规模集成电路时序收敛中的关键问题,单纯使用传统时序分析方法,已不能完全达到时序收敛的要求。
4) deviation correction
偏差校正
1.
Modeling method based on deviation correction and its application to the crystallization procedure for BPA;
基于偏差校正的建模法在BPA结晶过程中的应用
5) standard deviation
标准偏差
1.
Analysis of uncertainty in DJ2-theodolite level standard deviation of one circle measurement;
DJ2光学经纬仪一测回水平标准偏差测量结果不确定度的分析
2.
The six methods on estimating population standard deviation and their precision;
标准偏差的六种估计及其精密度
3.
The standard deviation of pressure signals is calculated to analyze the flow pattern in the riser of the reactor.
用多通道压差技术测定了气升式外环流反应器连续操作时不同操作条件下上升管不同轴、径向位置压差波动信号,并借助压差信号的标准偏差分析反应器上升管的流型特性。
补充资料：工艺
①将原材料或半成品加工成产品的工作、方法、技术等：～复杂ㄧ～精细。②手工艺：～品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条