说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 荷载分担比
1.
Study on Reinforcement-curtain Effect and Pile-soil Load Share Ratio of Pile Groups;
群桩“加筋遮帘”效应及桩土荷载分担比研究
2.
Influence of pile spacing, pile cap dimension and angle of internal friction of embankment filling on the pile efficacy is analyzed.
研究了桩间距、桩帽大小和填料内摩擦角对桩体荷载分担比的影响。
3.
The key point in the piled raft foundation design is to determine the proportion of load carried by piles and raft and the effect of diminished settlement of piles.
桩筏基础设计的关键在于确定桩筏的荷载分担比及桩对减小沉降的作用。
4.
A load or burden that is too full or heavy.
超载过量或过重的载荷或负担
5.
The Theory of Assimilative and Vertical isomerism Board;
大中桥梁荷载横向分布比拟正交异性板法
6.
Comparison Analysis of Internal Force Computation on Frame Structure under Vertical Loads;
竖向荷载作用下框架内力计算方法的对比分析
7.
Study on Low Cycle Fatigue Fracture Surfaces of Titanium Alloy BT9 under Non-proportional Loadings
钛合金BT9非比例载荷低周疲劳断口显微分析
8.
Contrast Analysis on Prediction Models for Load-displacement Curve of Uplift Pile
抗拔桩荷载-位移曲线拟合模型的比较分析
9.
ANALYSIS AND COMPARISON OF WIND LOAD ON BUILDING BETWEEN CHINESE CODE AND VIETNAMESE STANDARD
中国与越南建筑风荷载规范计算分析比较
10.
irregularly distributed load
非匀布荷载;不规则分布荷载;不均匀分布荷载;不平匀分布荷重
11.
Stress distribution of modified bar - clip implant - borne overdenture in the edentulous mandible under verti- cal loads and oblique loads
下颌改良杆卡式种植覆盖义齿的应力分布——垂直载荷与斜向载荷的比较
12.
The loads for which a building must be designed may be classified into dead loads,vertical live loads,and lateral live loads.
设计建筑物必须考虑的荷载可分为恒载、竖直活荷载和侧向活荷载。
13.
There is one oil groove in the bronze bushing, where lubricant can flow into the axis from the oil hole on the cap of housings.
轴瓦内表面的不承担载荷部分开有油槽,润滑油通过进油孔和邮沟流进间隙。
14.
Safety Analysis of Stainless Steel Piping Containing Incomplete Welding Defects under Proportional Loads;
等比例载荷作用下含未焊透缺陷不锈钢管道安全性分析
15.
Study on Rigid and Flexible Static Loading Test of the CFG Pile Composite Foundation in Bejing-Shanghai High-Speed Railway;
京沪高速铁路CFG桩复合地基刚性与柔性静载荷试验对比分析研究
16.
Research on Back-analysis of the Rock Parameters and Load Distribution Ratio in the Process of Tunnel Construction;
隧道施工中围岩参数反演及载荷分配比例问题研究
17.
The Analysis and Comparison between the Effective Length Method and the Inmaginary Horizontal Load Method for the Design of Enbraced Frame;
无支撑框架计算长度法和假想水平荷载法的分析比较
18.
Dynamic Time-history Analysis of 3-Dimension Structures under Wind with Non-classically Damping;
风荷载作用下非比例阻尼空间结构动力时程分析