说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 旋转壳
1.
The Spline Penalty Subdomain Methods for Stress Analysis of Combinative Shells of Revolution
用于组合旋转壳分析的样条罚子域法
2.
Application of Spline Subdomain Method to the Endochronic Elastoplastic Analysis of Revolutionary Shells
样条子域法在旋转壳内时弹塑性分析中的应用
3.
Large Deflection Equation of Axisymmetrical Deformation Problem for a General Sandwich Shell of Revolution
一般夹层旋转壳在轴对称变形下的大挠度方程
4.
Dynamic Response Analysis and Simulation of Shell of Revolution;
旋转壳体碰撞动力响应分析与仿真模拟
5.
Wind Load Configure Coefficients of Dome in Load Code;
对荷载规范中旋转壳顶的风载体型系数的研究
6.
Simplification of the Derivation of Influence Coefficients for Symmetric Frusta of Shells of Revolution
对称锥台旋转壳体影响系数的简化计算方法
7.
The Asymptotic Analysis of Symmetrical Free Vibration of Revolution Shell;
旋转薄壳轴对称自由振动的渐近分析
8.
DETERMINATION OF OVERALL STRUCTURAL PARAMETERS OF SMALL CALIBER APDS
小口径旋转稳定脱壳穿甲弹总体结构参量选择
9.
Study on Revolving Gravity Waves in Liquid-Elastic Shells Coupled System;
壳液耦合系统中旋转重力波现象的研究
10.
The Research on Membrane Element with Drilling Degree of Freedom Based on Thin Shell Finite Element Method;
基于薄壳有限元法的带旋转自由度膜元研究
11.
Simulation of springback using rotation-free shell element
基于无旋转自由度壳单元的回弹预测方法
12.
The new finite element formation and programming to reinforced round shell
带肋旋转薄壳的新型有限单元构造及编程
13.
NONLINEAR VIBRATION CHARACTERISTICS OF ROTATING THIN-WALLED CIRCULAR CYLINDRICAL SHELL WITH PRECESSION OF VIBRATION MODE
旋转薄壁圆柱壳振型进动的非线性振动特性
14.
To revolve or cause to revolve.
旋转旋转或引起旋转
15.
The engine uses a three-lobe rotor that rotates eccentrically in an oval housing.
这种发动机采用一个在椭圆形外壳内偏心旋转的三角转子。
16.
Vibrations of Revolution Shells in Turning-Point Range and Applications in Loudspeakers;
旋转薄壳在转点频段内的振动及其在扬声器中的应用
17.
Of or relating to a gastropod shell that coils clockwise and has its aperture to the right when facing the observer with the apex upward.
右旋的软体动物的螺形外壳上的螺线顺时针螺旋即顶点向上,面对观察者时,螺线向右旋转
18.
Replace by seating the assembly in the lamp housing and turning the lock ring 1/8 turn clockwise to secure.
更换组合,将组合定位于灯的外壳并顺时钟旋转锁杆1/8圈以固定。