1.
Analysis on Toughening Mechanisms of Different SiC Particle Reinforced Thermal Protective Ceramics
几种SiC颗粒增韧防热陶瓷的增韧机制分析
2.
Discussing on Effect of Al_2O_3 Particles on Reinforcing and Toughening Mechanism of LiTaO_3 Matrix Piezoelectric Ceramic Composite
Al_2O_3颗粒对LiTaO_3压电陶瓷增强增韧机制的探讨
3.
Research on Mechanical Properties and Toughing Mechanism of Ti/Ti-Al Micro Laminate Sheet Prepared by EB-PVD Technology
EB-PVD工艺制备Ti/Ti-Al微层板的力学性能与增韧机制研究
4.
The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.
细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。
5.
The morphology of crack propagation indicate that there is the toughening mechanism of whisker's pull- out and crack deflection.
裂纹进展形态表明,存在晶须拔出及裂纹偏转增韧机制。
6.
Research on Mechanism and Preparation for in Situ Columnar Crystal Toughened Al_2O_3 Ceramic;
原位生长柱状晶复合增韧氧化铝陶瓷制备方法及机理研究
7.
Sintering kinetics and mechanisms of alumina matrix ceramic materials toughened by diopside and AlTiB
透辉石/AlTiB增韧补强氧化铝基陶瓷材料烧结动力学和烧结机制
8.
Study on the Toughening and Strengthening Mechanisms of PP/UHMWPE Alloy;
PP/UHMWPE共混合金增韧增强机理研究
9.
Strengthening and Toughening Mechanism of Steel Fiber Reinforced High-strength Concrete and Design Method Based on Toughness;
钢纤维高强混凝土增强、增韧机理及基于韧性的设计方法研究
10.
Toughening Effect of PEB-g-MAN on SAN Resin and Its Toughening Mechanism
PEB-g-MAN增韧SAN树脂的力学性能及增韧机理的研究
11.
The Preparation and Characterization of HDPE/E-TMB;
高密度聚乙烯/增韧母料增韧体系研究—制备、结构与性能
12.
Toughening Mechanisms of PVC/SAN/ABS Blends
PVC/SAN/ABS共混物的增韧机理
13.
Preparation and Characterization of PA1010 Toughened by Nano Rubber;
纳米橡胶增韧尼龙1010的制备与表征
14.
Study on Polypropylene/M-EPDM and Mechanisms of Toughening and Reinforcing;
聚丙烯/M-EPDM性能及增韧增强机理的研究
15.
Synergistic Effects of Compound Inorganic Particles Reinforcing and Toughening Polymer;
无机组合粒子增强增韧聚合物的协同效应
16.
Effect of SiC Whisker Content on Flexural Strength and Fracture Toughness of ZTA-matrix Composites;
SiC_w-ZTA陶瓷基复合材料增韧、增强机理的分析
17.
Preparation, Curing Kinetics and Toughening Mechanism of Thermotropic Liquid Crystalline Polymer/ O-cresol Formaldehyde Epoxy Resin Blends;
热致性液晶/邻甲酚醛环氧树脂共混物的制备、固化动力学及其增韧机理的研究
18.
Toughening Mechanisms and Energy Release Rates of Smart Composites
智能复合材料的增韧机理与能量释放率