1.
The Study on the Electrical Properties and the Cold Rolling Technique for Copper and Aluminum Composite Laminates;
铜铝轧制复合板导电特性及复合技术的研究
2.
Study on Inhibition Mechanism of the Interface Compounds in Steel-Aluminium Rolling
钢铝轧制复合界面化合物的抑制机理研究
3.
Preparation of Aluminum Foam Sandwich Perform by Roll-bonding Process
轧制复合法制备泡沫铝夹心板发泡预制坯
4.
Studies on the Roll-forming and Properties of Stainless Steel/Aluminum/Stainless Steel Laminated Sheet;
不锈钢/铝（合金）/不锈钢复合材料轧制复合与性能研究
5.
Bond Rolling Principles and Heat Treatment of Cu/Al Clad Sheet
铜铝轧制复合变形规律及热处理的研究
6.
Experiment Study on the Techniques of the Cold Rolling Steel Matrix Composites;
冷轧钢基复合材料轧制工艺实验研究
7.
Composite rolling of three-layer iron-based metals of 25Cr5MoA steel/micro-alloyed steel/Q235 steel
25Cr5MoA钢/微合金钢/Q235钢的复合轧制
8.
Study on rolling of forged W_p/2024Al composites
锻造W_p/2024Al复合材料的轧制研究
9.
Bond Rolling Principles of Laminated Precision Alloy Materials;
精密合金层状复合材料轧制变形规律的研究
10.
Research of Compound Rolling Deformation Rules and Technology Optimize on Brazing Foil of Aluminum Alloy;
铝合金钎焊箔材复合轧制规律及工艺优化
11.
NUMERICAL SIMULATION IN ELECTROSLAGROLL CLADDING EQUIPMENT DESIGNING
电渣工艺复合轧辊制造装置数值模拟辅助设计
12.
Neck Shrinkage Control of Composite Rollers with Nodular Iron as Core Material
离心铸造球铁芯复合轧辊辊颈缩松的控制
13.
Roll Compaction and Subsequent Heat Treatment of Fe-Si Composite Powder;
铁、硅复合粉末的轧制成型与后续热处理
14.
The Study of the Process and the Rupture on the Explosion Welding-Rolling Ti-steel Composites Plate;
爆炸焊接—轧制钛钢复合板——工艺和断口形貌研究
15.
Research and FEM Simulation on Rolling Deformation of Ag/Cu Composite
Ag/Cu金属复合材料轧制变形研究及有限元模拟
16.
Lateral spreading deformation behavior in flat rolling of copper cladding aluminum composite rods
铜包铝复合棒材平辊轧制宽展变形行为
17.
Microstructure and Properties of Rolling Cu-10Fe-2Ag-0.15Zr In-situ Composites
轧制变形Cu-10Fe-2Ag-0.15Zr原位复合材料的组织和性能
18.
Study on 3 layer high chromium iron roller casting
高铬三层复合结构铸铁轧辊的试制研究