1.
Mechanism of Surface Nanocrystallization of Titanium during Surface Mechanical Attrition
表面机械研磨工业纯钛表面纳米化研究
2.
Characterization of Microstructural Parameters of Pure Iron after Surface Mechanical Attrition Treatment
纯铁经表面机械研磨处理后微结构参量的表征
3.
Investigation of Alloying Method of Pure Iron Subjected to Surface Mechanical Attrition Treatment
纯铁表面机械研磨Fe-Ni合金化方法的研究
4.
Microstructure and Properties of Zr-4 Alloy after Surface Mechanical Attrition Treatment
表面机械研磨处理后Zr-4合金的组织与性能
5.
Microstructure and Hardness of Pure Aluminum Surface Nanocrystallization after SMAT
纯铝表面机械研磨纳米化后的显微组织和硬度
6.
Effect of surface mechanical attrition treatment on plasma nitriding behavior of H13 steel
表面机械研磨处理对H13钢离子渗氮行为的影响
7.
Research on Ionized Boronizing with Glow Discharging Heating of Low Carban Steel after Surface Mechanical Atrrition Treatment;
表面机械研磨处理后低碳钢辉光膏剂等离子渗硼的研究
8.
Influence of Surface Mechanical Attrition Treatment on Microstructure and Properties of X80 Pipeline Steel Welded Joints
表面机械研磨处理对X80管线钢焊接接头组织与性能的影响
9.
Effect of annealing on property of 316L stainless steel nanocrystallized by surface mechanical attrition treatment
退火对表面机械研磨处理纳米化316L不锈钢性能的影响
10.
Microstructure and Properties of Surface Nanocrystallized CP-Ti Processed by SMAT;
机械研磨工业纯钛表面纳米化与组织性能研究
11.
Fabrication of Aluminum with Porous Surface by Mechanical High-energy Ball Milling
机械高能球磨法制备表面多孔金属铝
12.
Study on Structure, Mechanical Attrition Pickling and Acid Free Scale Removal of Oxide Scale Formed on Hot-rolled Steels;
热轧碳钢表面氧化皮结构、机械研磨酸洗及无酸酸洗研究
13.
Mechanical graining: Mechanically roughening the surface of a metal sheet by means of abrasive powders, sand bursting, etc, for use as an offset plate. See Graining.
机械磨版:用磨擦粉剂，喷沙等机械方法把金属片的表面造成粗糙，适合为柯式印刷。参阅磨版。
14.
The science of the mechanisms of friction, lubrication, and wear of interacting surfaces that are in relative motion.
摩擦学研究处于相对运动中的相互作用的表面的摩擦，润滑和磨损等机械装置的科学
15.
The Study of Lapping Mechanism and Surface Quality on Lapping of Solid Abrasive;
固着磨料高速研磨机理及工件表面质量的研究
16.
Best surface finish is provided by machining methods, especially by grinding.
用机械加工方法，特别是用磨削方法，可以获得最佳表面光洁度。
17.
Study on Removal Mechanism of Ductile-Mode Grinding in 300mm Silicon Wafer Surface Grinding Process
300mm硅片表面延性磨削机理研究
18.
The Research on Mechanical Surface Treatment and Laser Alloying of Titanium;
钛表面机械强化及其激光合金化研究